Abstract:A spray reactor in which the liquid phase containing dissolved p-xylene (pX) and the catalyst is dispersed as fine droplets by a nozzle into a continuous vapor phase containing the oxidant (O2) is shown to produce high-purity terephthalic acid (TPA) with less than 25ppm 4-carboxybenzaldehyde (4-CBA) in the solid TPA product. In sharp contrast, the solid TPA product obtained from a conventional stirred reactor similar to the configuration used in the conventional Mid-Century (MC) process contains nearly 1000ppm 4-CBA even though the reactor is operated at similar pressure and temperature (15bar and 200°C) but with the gas phase dispersed into the liquid phase. The dramatic improvement in TPA product quality during spray reactor operation is attributed to two main factors: the alleviation of interphase gas–liquid mass transfer limitations that facilitates more complete oxidation of the pX and the intermediate oxidation products to TPA, and reduced backmixing that enhances the oxidation rates. Theoretical calculations show that the time constants for O2 diffusion in typical spray droplets (50μm diameter) is 1–2 orders of magnitude lower than the kinetic rate constant confirming complete O2 penetration and saturation of the droplets. Further, the usage of CO2 as an inert gas and the dominance of acetic acid (>50mol.%) in the vapor phase under reaction conditions create an environment that falls outside of the flammability envelope. Mathematical modeling of the stirred reactor using MC process conditions accurately predicts the steady state temperatures observed in industrial reactors. The model also clearly divulges that the cooling provided by partial evaporation of the acetic acid solvent is vital to maintain stable steady state operation. By eliminating the need for a hydrogenation step, the spray reactor has the potential to not only reduce capital and operating costs but also provide environmental benefits.

A Green Oxidation Process of P-Xylene to Terephthalic Acid Through the UV Irradiation-Enhanced Ozonation Process

Progress in the Research and Development of P-Xylene Liquid Phase Oxidation Process

The Oxidation of Benzyl,Allyl Primary Alcohols with CuI/TPA/TEMPO

Aerobic Oxidation of C-H Bonds to Carboxylic Acids Enabled by Decatungstate Photocatalysis

A spray reactor concept for catalytic oxidation of p-xylene to produce high-purity terephthalic acid

One-step Highly Selective Oxidation of P-Xylene to 4-Hydroxymethylbenzoic Acid over Cu-MOF Catalysts under Mild Conditions

Aerobic Oxidative Hydroxylation of Arylboronic Acids under Visible-Light Irradiation Without Metal Catalysts or Additives.

Aerobic Oxidation of P-Xylene Catalyzed by (T_(p-Cl)ppfe)_2o/co(oac)_2 in Absence of Solvent and Process Optimization

Engineering an Unspecific Peroxygenase from Thielavia terrestris for Specific Terminal Oxidation of Xylene Derivatives

Synthesis of Green Oxane and 1,3-Dioxolanes Catalyzed by Copper p-Toluene Sulfonate

Multistage Transformation of Xylene Compounds Enabled by Pyridinium Photocatalyst Through Solvent and Light Manipulation

Photo-induced deep aerobic oxidation of alkyl aromatics

Radical Propagation Facilitating Aerobic Oxidation of Substituted Aromatics Promoted by Tert-Butyl Hydroperoxide

Degradation of p-Toluenesulfonic Acid by Ozonation: Performance Optimization and Mechanism

Mild Oxidation of Toluene to Benzaldehyde by Air

An Efficient Process for Aromatic Vocs Degradation: Combination of Vuv Photolysis and Photocatalytic Oxidation in a Wet Scrubber

A Much Cleaner Oxidation Process for 2,2′-Dibenzothiazole Disulfide Synthesis Catalyzed by Phosphotungstic Acid

Catalytic Transformation of Aliphatic Alcohols to Corresponding Esters in O2 under Neutral Conditions Using Visible-Light Irradiation

One-step Synthesis of 2,5-Dihydroxyterephthalic Acid by the Oxidation of P -Xylene over M-MCM-41 (M = Fe, Fe/Cu, Cu) Catalysts

Visible-Light-Induced Deep Aerobic Oxidation of Alkyl Aromatics

Oxidation of p -toluenesulfonic acid fractionated hybrid Pennisetum by different methods for carboxylated nanocellulose preparation: The evaluation of efficiency and sustainability