Abstract:Solid polymer electrolytes (SPEs) were investigated for several decades due to their good compatibility with electrodes. However, meeting the essential requirements for solid polymer electrolytes, including enhanced ionic conductivity, superior solubility with conductive lithium salts, and robust interface stability when in contact with a Li anode, remains a formidable challenge. In our work, we found that transition metal carbides (NiNbCeC) over mesoporous silica (SBA-15) can be filled into the Polyethylene Oxide (PEO) matrix to form composite solid electrolytes which can greatly improve the ionic conductivity of PEO. We investigate a series of transition metal carbides with varying mass ratios of Cerium (5%, 10%, and 20%) to fabricate All-Solid-State Li-S batteries (ASSLi-S). Our results demonstrate that different mass ratios of Cerium play a pivotal role in enhancing the ionic conductivity of the composite solid electrolytes, reducing impedance levels from 9150 O (20% Ce) to 4000 O (5% Ce) to 1730 O (10% Ce). At room temperature, the high initial specific capacity at 1C and reversible specific capacity after 100 cycles are 525 and 363 mAh/g, 605 and 403 mAh/g, 246.3 mAh/g and 63.28 mAh/g for 5% Ce, 10%, and 20%, respectively. Furthermore, long-term cycling tests of ASSLi-S cells at 0.5C reveal promising performance, with the cell containing 10% Ce solid electrolytes delivering an initial specific capacity of 1165.7 mAh/g and maintaining 335 mAh/g after 200 cycles. This represents a significant breakthrough, demonstrating that PEO-based solid electrolytes can achieve impressive electrochemical results at room temperature. SEM characterization was employed to assess the volume change in the solid electrolyte layer and elemental distribution of solid electrolyte materials through cross-sectional analysis. This analysis revealed that the failure modes of solid-state Li-S cells can also be attributed to the migration of sulfur elements from the cathode to the solid electrolyte layer during the cycling process. XRD was utilized to study the crystallinity of composite solid electrolytes. This study represents a significant stride in the progress of high-performance solid polymer electrolytes for All-Solid-State Li-S batteries, shedding light on the failure modes of such batteries. It underscores the potential of composites based on transition metal carbides in addressing crucial challenges for their practical implementation in Solid-State Lithium-Sulfur Batteries.

Solid Polymer Electrolyte-Based High Areal Capacity All-Solid-state Batteries Enabled with Ceramic Interlayers

Scalable, Ultrathin, and High‐Temperature‐Resistant Solid Polymer Electrolytes for Energy‐Dense Lithium Metal Batteries

Multifunctional Composite Binder with Synergistic Transport Mechanism to Achieve High Performance All-Solid-state Batteries

ll-solid-state Li – S batteries with a polymer – ceramic sandwich electrolyte by atomic layer deposition †

Recent progress of composite solid polymer electrolytes for all-solid-state lithium metal batteries

A cellulose reinforced polymer composite electrolyte for the wide-temperature-range solid lithium batteries

Free-standing Sulfide/polymer Composite Solid Electrolyte Membranes with High Conductance for All-Solid-state Lithium Batteries

High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes

Mechanistic Investigation of Polymer‐Based All‐Solid‐State Lithium/Sulfur Battery

A strategy involving the use of 3D self-supporting B.N co-doped carbon nanofiber composite solid polymer electrolytes to stabilize the interface of Polymer electrolyte and lithium-metal

Rechargeable Lithium Metal Batteries with an In‐Built Solid‐State Polymer Electrolyte and a High Voltage/Loading Ni‐Rich Layered Cathode

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

Novel PEO-based composite solid electrolytes for all-solid-state Li-S battery

Solid Polymer Electrolytes-Based Composite Cathodes for Advanced Solid-State Lithium Batteries

Recent progress in ultra-thin solid polymeric electrolytes for next-generation lithium batteries

High Ionic Conductivity of Composite Solid Polymer Electrolyte Via in Situ Synthesis of Monodispersed SiO2 Nanospheres in Poly(ethylene Oxide).

A Flexible Solid Polymer Electrolyte based Polymerized Ionic Liquid for High Performance Solid‐State Batteries

High-areal-capacity and long-cycle-life all-solid-state battery enabled by freeze drying technology

A High Power Density Solid Electrolyte Based on Polycaprolactone for High-Performance All-Solid-State Flexible Lithium Batteries

Electrochemical Characteristics of Composite Solid Polymer Electrolytes Containing 1-Dimensional Active Ceramic Filler for All-Solid-State Lithium-Ion Batteries

Rational design of hybrid electrolyte for all-solid-state lithium battery based on investigation of lithium-ion transport mechanism