Abstract:The natural circulation small modular reactor (NCSMR) is a 330 MW reactor which has no reactor coolant pumps (RCP) and no active safety injection systems at all. The reactor is mainly comprised of the reactor pressure vessel (RPV) with integral pressurize r and steam generator. RPV is enclosed by a vacuumed pressure containment vessel (PCV) and the PCV is submerged in the underground containment pool. A MELCOR model and corresponding input deck are developed for the RPV, PCV, and containment pool. The containment pool takes the role of ultimate heat sink (UHS) in accident situations. The containment pool may crack and leak in some critical accidents as the earthquake, leading to the severe accident of the reactor. A TMI-2 like SBLOCA in the RPV (stuck open RVVs) along with the containment pool crack (loss of ultimate heat sink) is simulated in the work. So me key parameters as the RRVs stuck open fraction, the PCV-SRVs open or not, the containment pool crack position would have large influence on the severe accident sequence. The sensitivity of these parameters to the accident sequence is analyzed in the work. According to the simulation results, the RPV pressure decreased with the RRVs stuck open. The depressurization of RPV accelerated with the RPV-SRV open fraction increase. The PCV pressure increased after that. Two cases as the PCV-SRV open after PCV pressure increase to 5 MPa, and PCV break while the RV d id not open, are analysis. The coolant discharge mass flo wrate in RPV and PCV were different in two cases, leading to the different degradation situation of the core. Since the containment pool is so important for the accident mitigation, sensitivity analysis is done for the containment pool crack position in the pool. The work will be meaningful in gaining an insight into the detailed process involved. One of the final goals of this work would be to identify appropriate accident management strategies and countermeasures for the potential extreme natural hazard induced severe accidents during the design process of NCSMR.

Research on Failure Model and Safety Boundary of Ellipsoid Lower Head for SMR

Study on the Lower Head Failure in Severe Accidents Part II: Thermal-mechanical Coupling Behavior Analysis on CAP1400 Reactor Lower Head

Study on the Lower Head Failure in Severe Accident Part I: Model Development and Validation

Development of PWR Lower Head Failure Model for Severe Accident Analysis

Development of CHF Models for Inner and Outer RPV Gaps in a Meltdown Severe Accident

Simulation of the Small Modular Reactor Severe Accident Scenario Response to Sbo Using Melcor Code

Development of thermal creep model for reactor pressure vessel lower head and application in OLHF experimental analysis

Study on Heat Transfer Behavior of Molten Pool in Lower Head Introduced by SBO Severe Accident

Analysis of Severe Accident Induced by Loss of Coolant Accident for a Small Pressurized Water Reactor

Sensitivity Analysis of the SBLOCA Induced Severe Accident for a Natural Circulation Small Modular Reactors

MELCOR Simulation of the SBLOCA Induced Severe Accident for the SMR in a Floating Nuclear Power Plant

Numerical Investigation on the CHF Model and Prediction for the External Cooling Channel of Lower Head

Theoretical Research of CHF in Hemispherical Narrow Gap Channel Between Molten Corium and Lower Head

Study on the Fallback Time Analysis Method for Loss of Ultimate Heat Sink under Normal Power Operation of Nuclear Power Unit

Safety Research of IVR-ERVC for Advanced Water Cooled Reactor

Melcor Severe Accident Analysis for A Natural Circulation Small Modular Reactor

Investigation of Severe Accident Scenario of Pwr Response to Loca along with Sbo

Severe Accident Analysis Induced by Secondary Pipeline Break in a Small Modular PWR

Development and Validation of Thermal-Mechanical Creep Failure Module for Reactor Pressure Vessel Lower Head

Design and Evaluation of Mitigation Measures for Tsinghua High Flux Reactor Loss-of-Coolant Accidents

Numerical Analysis of Melt Migration and Solidification Behavior in LBR Severe Accident with MPS Method