Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental Study and Finite Element Analysis on Seismic Behavior of Flat Vertical-Diaphragm Stiffened Concrete-Filled SHS Column Joints

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

EXPERIMENTAL INVESTIGATION AND NONLINEAR FINITE ELEMENT ANALYSIS ON THE BEHAVIOR OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMN CONNECTIONS

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Inclined Concrete-Filled SHS Steel Column to Steel Beam Joints under Monotonic and Cyclic Loading: Experiments

Effect of vertical stiffeners on the seismic performance of T‐shaped CFST column to steel beam joint

Seismic behaviour of Concrete-filled steel tubular column to H-Shape steel beam connection with side plate

FE modeling analysis of the joints with diagonal concrete filled steel tubular column and steel beam

Experimental study on seismic behaviors of prefabricated embedded concrete-filled steel tube special-shaped column exterior frame

Experimental Research on Seismic Behavior of Concrete Filled CHS and SHS Columns and Steel Beam Planar Frames

Experimental and Numerical Investigation of Cross-Shaped Joints with Adjustable Stiffness for Cold-formed Thick-Walled Steel Column–Column Connections

Seismic performance of special-shaped hexagonal concrete filled steel tubes with inner diaphragm plates and shear studs

Seismic Performance of the Concrete-Encased CFST Column to RC Beam Joints: Analytical Study

Seismic Performance of Irregular-Shaped Concrete-Filled Steel Tube Column to H-shaped Steel Beam Joints with Inner Semi-Diaphragm: Experimental and Numerical Study

Performance of Concrete-Encased CFST Column-to-beam 3-D Joints under Seismic Loading: Analysis

Experimental and Simulation Studies on the Seismic Performance of I-section Steel-Concrete Composite Columns

Experimental and numerical investigation on the behaviour of square concrete-filled cold-formed double-skin steel stiffened tubular short columns

Experimental study on square concrete-filled double skin steel tubular short columns