Abstract:Background The effective vibration suppression frequency band of linear vibration absorber is narrow. The nonlinear energy sink (NES) can effectively broaden the vibration suppression frequency band. However, with the increase of excitation intensity, the controlled system is easy to produce high branch response, resulting in the failure of the NES. It is of great significance to study the mechanism of high branch response of the controlled system and improve the stability of the working performance of the NES under different excitation intensity. Purpose The purpose of this study is to analyze the boundary conditions for the controlled system to produce high branch response. While ensuring the performance of the NES under low disturbance, the generation of high branch response of the controlled system is restrained to a certain extent. That is to improve the vibration suppression performance of the NES under a wider excitation intensity. Methods Based on the existing NES, the negative stiffness is introduced to improve the working performance under low disturbance. At the same time, the slow variable flow equation of the system is analyzed by using the complex variable averaging (CX-A) method, and the boundary conditions of saddle node bifurcation are obtained. According to the influence of the structure parameters on the boundary conditions, the structure parameters of the NES are optimized. Results The diagrams of saddle node bifurcation and Hopf bifurcation show that the excitation frequency near the main resonance has an important influence on the bifurcation boundary. When the nonlinear stiffness of the NES is 0.8, 1.0, 1.2 and 1.4 respectively, the performance of the NES will be gradually improved, and then the nonlinear stiffness continues to increase, resulting in high branch response. Similarly, when the damping ratio is 0.8, 0.6 and 0.4 respectively, the performance of the NES is gradually improved, and then when the damping ratio continues to decrease, high branch response will occur. Conclusion The results show that the excitation frequency and amplitude have important effects on the truncation damping and bifurcation boundary. Increasing the nonlinear stiffness or reducing the damping of the PNES can improve the vibration suppression performance near the main resonance, but when it exceeds a certain threshold, it will cause the high branch response.

Modeling and Vibro-Acoustic Behavior Analysis of a Plate-Cavity Coupling System Equipped with a Nonlinear Energy Sink

Research on suppressing radiation noise of plate inside acoustic cavity based on targeted energy transfer of nonlinear energy sink

Modeling and Vibro-acoustic Characterization of Elastic Plate-Irregular Hexahedral Acoustic Cavity Coupling Systems

Subsonic Aeroelastic Stability Analysis and Vibration Control of a Plate by Using Nonlinear Energy Sink

Vibro-acoustic Modeling of the Turbulent Excited Cavity-Plate-exterior Space Coupled System

Dynamic Analysis of 1-Dof and 2-Dof Nonlinear Energy Sink with Geometrically Nonlinear Damping and Combined Stiffness

Vibration Analysis of a New Nonlinear Energy Sink under Impulsive Load and Harmonic Excitation

Analytical Solution and Energy Flow Analysis of a Vertical Vibration‐Controlled System Using the Nonlinear Energy Sink

Vibration Suppression of Nonlinear Laminated Composite Plates Using Internal Oscillator-Enhanced Nonlinear Energy Sinks

Vibration reduction in truss core sandwich plate with internal nonlinear energy sink

Vibro-acoustic Analysis of the Thin Laminated Rectangular Plate-Cavity Coupling System

Vibration Suppression of Cantilever Plate Using Nonlinear Energy Sink

Enhanced nonlinear performance of nonlinear energy sink under large harmonic excitation using acoustic black hole effect

Isogeometric Modeling and Vibro-Acoustic Analysis of Flow-Excited Irregular Cavity-Plate-Exterior Space Coupled System

Vibration suppression and energy absorption of plates in subsonic airflow using an energy harvester enhanced nonlinear energy sink

Study on Vibro-Acoustic Property of Composite Laminated Rotary Plate-Cavity System Based on a Simplified Plate Theory and Experimental Method

The Modeling Method of Anisotropic U-shaped Plate and U-shaped Plate–cavity Coupled System

Characteristic Analysis and Design of Nonlinear Energy Sink with Cubic Damping Considering Frequency Detuning

Nonlinear Energy Sink for Whole-Spacecraft Vibration Reduction

The Vibro-Acoustic Characteristics Analysis of the Coupled System Between Composite Laminated Rotationally Stiffened Plate and Acoustic Cavities

Analysis of Vibration Suppression Performance of Nonlinear Energy Sink with Negative Stiffness