Abstract:Wave energy converters(WECs) integrated into floating breakwaters or, more generally, their designs also used as wave absorbers can provide a space- and cost-sharing solution to enhance the efficiency of coastal protection. In this study, the hydrodynamic performances of an oscillating buoy(OB)-type single-pontoon floating breakwater(SPFB) and an oscillating water column(OWC)-type dual-pontoon floating breakwaters(DPFB) are evaluated, respectively, and are comprehensively compared with each other. A series of physical experiments were conducted to investigate the effects of wave parameters, geometrical dimensions, gap distances and PTO damping coefficients. Numerical simulations based on the fully nonlinear potential flow theory cross-check the measured data, and help to further understand the contribution of higher-order waves. It is found that both the wave attenuation and energy conversion of the OWC-type DPFB with a non-uniform draft (i.e. shallow front-pontoon draft and deep back-pontoon draft) are better than those of the OB-type SPFB with the same displacement. Meanwhile, for an OWC-type DPFB, a larger ratio of the chamber width and the total pontoon width has a beneficial effect on the wave attenuation, but has an adverse effect on the maximum energy conversion efficiency. Under the premise of the same pontoon draft, the maximum conversion efficiency of the OWC for the optimal opening ratio is higher than that of the OB for the optimal PTO damping, but the effective frequency bandwidth is almost identical between two devices. Strong wave nonlinearity can generate more energy dissipation induced by the viscous effect and the vortices, resulting into the reduction of energy extraction.

Multi-freedom Effects on a Raft-Type Wave Energy Convertor- Hydrodynamic Response and Energy Absorption

Performance of a Raft-Type Wave Energy Converter with Diverse Mooring Configurations

Research on the Hydraulic Power Take-off Unit of a Hybrid Wave Energy Converter

Hydrodynamic performance investigation of the multi-degree of freedom oscillating-buoy wave energy converter

Experimental Results from Wave Tank Trials of a Multi-Axis Wave Energy Converter

Experimental and Numerical Analysis of Power Take-off Control Effects on the Dynamic Performance of a Floating Wind-Wave Combined System

Design, optimization and numerical modelling of a novel floating pendulum wave energy converter with tide adaptation

Numerical Study on the Dynamics of a Two-Raft Wave Energy Conversion Device

Experimental and numerical investigation of WEC-type floating breakwaters: A single-pontoon oscillating buoy and a dual-pontoon oscillating water column

A compressible degree of freedom as a means for improving the performance of heaving wave energy converters

Numerical Study on the Performance of a Wave Energy Converter with Three Hinged Bodies

WEC shape effect on the motion response and power performance of a combined wind-wave energy converter

Effect of varying PTO on a triple floater wave energy converter-breakwater hybrid system: An experimental study

Experiments and CFD Modeling of a Dual-Raft Wave Energy Dissipator

Research on hydrodynamic performance of a two-buoy wave energy converter with built-in tanks

Research on Energy-Capture Characteristics of a Direct-Drive Wave-Energy Converter Based on Parallel Mechanism

Study on the energy capture spectrum (ECS) of a multi-DOF buoy with MMR-PTO damping

Wave Tank Experiments on the Power Capture of a Multi-Axis Wave Energy Converter

Numerical Study of a Weight-Adjustable Buoy for Efficient Wave Energy Conversion

Analysis for Wave Power Capture Capacity of Two Interconnected Floats in Regular Waves

Hydrodynamic Responses of a Novel Modular Floating Structure System With Multi-Direction Expansion