Abstract:With the increasingly prominent problems of energy shortage and environmental pollution, the requirement for high-efficiency energy storage devices is becoming more urgent. Lithium-ion batteries (LIBs) are commonly used in portable electronic devices, such as laptops, mobile phones. However, their limited performances cannot meet the demands of ultrahigh energy density and safety in the fields of new energy vehicles and energy storage systems. The development and application of novel anode materials can increase the capacity of LIBs. Transition metal sulfides (TMSs) with ultrahigh theoretical capacity and chemical stability present bright application prospects. Among them, iron sulfide (FeSx) is regarded as one of the most promising anode materials due to its abundant reserves and environmental friendliness. However, the shortcomings of large volume expansion during cycling severely hinder the application of FeSx and other TMSs. Designing TMS anode materials with special structures and combining them with carbon-based materials can effectively improve their electrochemical performance. Constructing nanosized TMSs with a hierarchical hollow structural property is a common strategy to increase their cycling stability. The abundant free volume inside the hollow structure can serve as a buffer space for TMSs with severe volume expansion, greatly reducing the structural fracture phenomenon. The internal free volume is also conducive to the electrolytic penetration into the composites. In addition, the dense nanosheets on the surface enable the active materials to fully contact the electrolyte, and subsequently, more reaction sites are generated for the electrochemical reactions. Combining amorphous carbon with TMSs can increase the dispersity of composites and reduce the presence of agglomerated structures. The amorphous carbon layer can serve as a stable interface for electrochemical reactions, which is beneficial for maintaining high coulombic efficiency and structure retention during cycling. The disordered structures and defects inside the amorphous carbon layer can accelerate the transport of the electrolyte and Li+ ions. Moreover, the amorphous carbon layers can also provide a structural support network and electronic conduction paths for TMSs, thereby improving the electrochemical performance of composites. Polydopamine (PDA) demonstrates special “viscosity,” which can coat almost any material’s surface under a weak alkaline condition. After carbonization, PDA is carbonized into an amorphous carbon layer with nitrogen doping, and the increased carbon interlayer spacing and defects can serve as additional active sites for lithium storage. In this study, the hierarchical FeS2@FeS2@N,S-C hollow nanocubes are successfully synthesized by a series of solvothermal, PDA in-situ polymerization, and high-temperature vulcanization processes. The inner hierarchical hollow FeS2 is encapsulated in the heteroatom-doped carbon layer and in LIBs; the fabricated composites with a special structural property demonstrate improved electrode reaction kinetics. The results show that the discharge capacities of FeS2@FeS2@N,S-C are 505.6, 472.2, and 360 mAh/g at 0.2, 0.5, and 2 A/g, respectively. Moreover, the reversible capacity of 492.1 mAh/g is maintained after 500 cycles at 1 A/g, and the structure remains intact after cycling. The excellent electrochemical performance of FeS2@FeS2@N,S-C can be attributed to the heteroatom-doped carbon layer coating the hierarchical hollow structure and the synergistic effect of multiple components.

Metal Sulfide-Decorated Lamellar Porous Carbon Framework Hybrids for Fast Lithium Storage with High Volumetric Capacity

Metal sulfide nano-frameworks anchored into 3D honeycomb-like porous carbon nanofibers as freestanding anodes for high performance lithium-ion batteries

“Mobius Strip-Like” Fesn Alloy: A Novel Highly-Distorted 3d Hierarchical Porous Anode for Ultrafast and Stable Li Storage

Integrated interconnected porous and lamellar structures realized fast ion/electron conductivity in high-performance lithium-sulfur batteries

Title Confined Sn Nanoparticles into 3D Porous Carbon Skeleton for High Performance Lithium Storage

Electron Bridging Structure Glued Yolk-Shell Hierarchical Porous Carbon/sulfur Composite for High Performance Li-S Batteries

Hierarchical FeS&lt;sub&gt;2&lt;/sub&gt;@FeS&lt;sub&gt;2&lt;/sub&gt;@N,S-C Hollow Nanocubes for Lithium Storage

Design of Pyrite/carbon Nanospheres As High-Capacity Cathode for Lithium-Ion Batteries

Carbon Confined Mesoporous Catkin-like SnPS3 Nanostructure for Lithium Storage with Great Superiority

Low-Carbon and Nanosheathed ZnCo2O4 Spheroids with Porous Architecture for Boosted Lithium Storage Properties.

Core-shell structured porous carbon nanofibers integrated with ultra-small SnO2 nanocrystals for fast and stable lithium storage

Immobilization and Catalytic Conversion of Polysulfide by In-Situ Generated Nickel in Hollow Carbon Fibers for High-Rate Lithium-Sulfur Batteries

Fe3C-Fe3O4 Heterostructure Nanoparticles Embedded in Porous Carbon: Immobilization and Kinetic Acceleration of Lithium Polysulfides in Li S Batteries

Cu-hierarchical porous carbon anodes derived from metal-organic frameworks for long-lasting and high-energy lithium storage

Implanting ultrafine tin oxide nanocrystals on hollow and porous carbon nanorods towards superior lithium storage

Carbon coated bimetallic sulfide nanodots/carbon nanorod heterostructure enabling long-life lithium-ion batteries

Embedding Tin Disulfide Nanoparticles in Two-Dimensional Porous Carbon Nanosheet Interlayers for Fast-Charging Lithium-Sulfur Batteries

Zinc Oxide Quantum Dots Embedded Porous Carbon Nanosheets for High-Capacity and Ultrastable Lithium-Ion Battery Anodes

Hollow Carbon Nanofibers with Dynamic Adjustable Pore Sizes and Closed Ends As Hosts for High-Rate Lithium-Sulfur Battery Cathodes

Confining Sulfur in Integrated Composite Scaffold with Highly Porous Carbon Fibers/Vanadium Nitride Arrays for High‐Performance Lithium–Sulfur Batteries

Hollow Porous CoSnOx Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers As Anode Material for High-Performance Lithium Storage