Abstract:Because of the high cost and scarcity of Pt. the commercialization of fuel cell technology is still facing a great challenge. Compared with the proton exchange membrane fuel cell, one advantage of the anion exchange membrane fuel cell (AEMFC) is the possibility of partially replacing or completely removing Pt catalyst in the cathode. Recently, the oxygen reduction reaction (ORR) of transition metals (such as Fe, Co, Ni as well as their compounds) in alkaline environments has been greatly improved. with substantial efforts devoted to controlling the nanostructure and adjusting the active sites (including the density and chemical structure). Based on rotating disk electrode (RDE) tests, these transition metal compounds show attractive ORR performance as compared with state-of-art Pt/C catalysts. However, when fabricated into films for membrane electrode assembly, these highly active transition metal compounds (such as Co-based materials) do not show satisfactory fuel cell performance. hindering their further development for application in fuel cells. This is because of an insufficient understanding of structure-activity relationships of transition metal catalyst layers for fuel cells. Compared with conventional powder catalysts, nanostructured catalysts directly grown onto a conductive substrate, for example by electrodeposition, are anticipated to construct an electron conductive framework, optimizing the triple-phase-boundary within the catalyst layer. Furthermore, catalyst structures and their arrays can be easily and quickly obtained by the electrodeposition method. In this work, a catalyst layer composed of CoS/CoO nanosheets was grown in situ on a gas diffusion layer by electrodeposition. The morphology and elemental composition of the gas diffusion electrode were analyzed by scanning electron microscope (SEM), energy dispersive spectrometer (EDS) and X-ray diffraction (XRD). The ORR performance of the gas diffusion electrode was evaluated by half-cell, which can better reflect the actual fuel cell working condition compared with RDE analysis. The electrodeposition conditions (deposition cycles, dissolved oxygen) were studied to investigate their influence on the CoS/CoO nanosheets. The results show that the loading of the catalyst on the gas diffusion layer increases with the number of deposition cycles. thus resulting in a higher ORR activity. A gas diffusion electrode prepared in nitrogen atmosphere presents dense nanospheres with less mesoporous structure, showing lower electrochemical active area and poor ORR activity. By contrast, CFP@CoS50 presents nanospheres which consist of nanosheets. To further improve the performance of gas diffusion in the electrode. a post-heat treatment was conducted on CFP@CoS50 under different protective atmospheres and activation temperatures. The results indicate that with the increase of activation temperature under argon atmosphere, the morphology of the nanosheets gradually disappears, and the Co element aggregates to form >1 mu m particles. However, under the argon-hydrogen mixture (90% argon and 10% hydrogen), the agglomeration of the Co-based nanosheet can be effectively avoided. thus obtaining promising ORR performance. The results show that the CFP@CoS50-500-H-2 electrode has a predominantly four-electron ORR pathway for direct OH- formation. This work provides a facile electrodeposition method for preparing a transition metal-based electrode with controlled nanostructure, which may open a new avenue for the design of membrane electrode assemblies for next generation fuel cells.

Electrode Microstructure Design to Improve Effective Utilization of Fe-N/C Catalysts Towards Oxygen Reduction Reaction Process

High performance octahedral PtNi/C catalysts investigated from rotating disk electrode to membrane electrode assembly

Evolution of atomic-scale dispersion of FeNx in hierarchically porous 3D air electrode to boost the interfacial electrocatalysis of oxygen reduction in PEMFC

Fe 3 O 4 @N-Doped Interconnected Hierarchical Porous Carbon and Its 3D Integrated Electrode for Oxygen Reduction in Acidic Media.

Engineering local coordination environments and site densities for high‐performance Fe‐N‐C oxygen reduction reaction electrocatalysis

Multi-Scale Study On Bifunctional Co/Fe-N-C Cathode Catalyst Layers With High Active Site Density For The Oxygen Reduction Reaction

Ultra-fine Fe3C Nanoparticles Decorated in the Fe–N Co-Doped Carbon Networks with Hierarchical Nanoarchitectonics Towards Efficient Oxygen Reduction Electrocatalysis

High-density Active Sites Porous Fe/N/C Electrocatalyst Boosting the Performance of Proton Exchange Membrane Fuel Cells

Surface Engineering of PdFe Ordered Intermetallics for Efficient Oxygen Reduction Electrocatalysis

3D Porous Fe/N/C Spherical Nanostructures As High-Performance Electrocatalysts for Oxygen Reduction in Both Alkaline and Acidic Media.

Ultra-fine Fe 3 C nanoparticles decorated in the Fe–N co-doped carbon networks with hierarchical nanoarchitectonics towards efficient oxygen reduction electrocatalysis

Combining Structurally Ordered Intermetallics with N-doped Carbon Confinement for Efficient and Anti-Poisoning Electrocatalysis

Structural Engineering of Fe Single-Atom Oxygen Reduction Catalyst with High Site Density and Improved Mass Transfer

Atomic-Level Insight into Advanced Electrocatalyst Architectures

Exploring Efficient Fe/N/C Electrocatalysts for Oxygen Reduction from Nonporous Interpenetrated Metal–Organic Framework Involving in Situ Formation of ZnO Templates

Facet Engineering and Pore Design Boost Dynamic Fe Exchange in Oxygen Evolution Catalysis to Break the Activity-Stability Trade-Off

Enhanced electrocatalytic performance for oxygen evolution reaction via active interfaces of Co3O4arrays@FeOx/Carbon cloth heterostructure by plasma-enhanced atomic layer deposition

Synthesis of Co-based Gas Diffusion Electrode for Oxygen Reduction

Surface Engineered PdNFe 3 Intermetallic Electrocatalyst for Boosting Oxygen Reduction in Alkaline Media

Surface Engineered PdNFe3 Intermetallic Electrocatalyst for Boosting Oxygen Reduction in Alkaline Media

In-situ Coupling FeN Nanocrystals with Fe/Fe3C Nanoparticles to N-doped Carbon Nanosheets for Efficient Oxygen Electrocatalysis