Unveiling the Thermal Stability of Diketopyrrolopyrrole-Based Terpolymers: A Key Element for Enhanced Efficiency and Stability of Organic Solar Cells

LEONATO TAMBUA NCHINDA,Zewdneh Genene,Wendimagegn Mammo,Newayemedhin A. Tegegne,Tjaart P. J. Krüger

DOI: https://doi.org/10.26434/chemrxiv-2024-mcv83

2024-04-23

Abstract:With the advent of novel polymers, organic solar cell (OSC) research has evolved significantly over the past decade. The molecular engineering of terpolymers has allowed for simple morphological control in binary devices over ternary blends, with the highest power conversion efficiencies (PCEs) exceeding 18%. However, research on the stability of OSCs is still lagging behind. In this regard, we examined the thermal stability of a series of terpolymers comprising one electron donor (thienyl-substituted benzodithiophene, BDTT) and two types of electron acceptors namely fluorobenzotriazole (FTAZ) and thienothiophene-capped diketopyrrolopyrrole (TTDPP) and their blends with PC71BM. The terpolymers demonstrated broad absorbance ranging from below 350 nm to 900 nm. The thermal stability of the terpolymers was investigated as pristine thin films and as bulk heterojunction (BHJ) films of the terpolymers blended with PC71BM by heating at 85 ◦C. We observed that thermal degradation had no sizeable effect on the properties of the pristine terpolymers while the blended films demonstrated significant changes in their morphology due to the inclusion and aggregation of PC71BM. After thermal annealing at 85 ◦C, the width of the symmetric C=C stretching Raman mode and the C=C/C–C intensity ratio of pristine terpolymers and terpolymer:PC71BM thin films revealed that incorporation of the FTAZ acceptor improves the thermal stability of the BHJ active layers. Furthermore, prolonged thermal annealing times (> 3 hours) resulted in the development of PC71BM aggregates and terpolymer decomposition with no evident changes in the molecular and chemical structure of the terpolymers. Our findings indicate that by gradually annealing the blended films using an appropriate annealing time, the diffusion of PC71BM molecules to form aggregates can be carefully regulated, resulting in a nanostructure critical to the efficiency of organic solar cells.

Chemistry

What problem does this paper attempt to address?

This paper primarily investigates the thermal stability of diketopyrrolopyrrole (DPP)-based ternary copolymers in organic solar cells (OSCs), which is a key factor for improving efficiency and stability. The study compares the performance of ternary copolymers with different ratios of the electron donor (thienyl-substituted benzodithiophene, BDTT) and two electron acceptors (fluorobenzotriazole, FTAZ and thienothiophene-capped diketopyrrolopyrrole, TTDPP), as well as their blend films with PC 71BM.

The authors found that the untreated ternary copolymer films maintained their properties during thermal degradation, while the blend films showed morphological changes after heating at 85°C, due to the inclusion and aggregation of PC 71BM. The study demonstrated that the addition of FTAZ as an acceptor improved the thermal stability of the active layer. Prolonged thermal annealing caused aggregation of PC 71BM and degradation of the copolymer, but the molecular and chemical structure remained unchanged.

By controlling the annealing time and temperature, the diffusion of PC 71BM molecules can be adjusted to form nanostructures crucial for the efficiency of organic solar cells. The paper emphasizes the importance of understanding the degradation mechanisms of the active layer under thermal stress for manufacturing high-performance and long-term stable organic solar cells.