Abstract:Cu-ZnO-Al2O3 is the most widely applied catalyst for CO2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al2O3 catalysts have been successfully demonstrated. By using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al2O3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h−1 kg−1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO2 dissociation.

From Digital Blueprint to Chemical Reality: Methanol to Formaldehyde at Ambient Conditions

From digital blueprint to chemical reality: Methanol to formaldehyde at ambient conditions

Catalytic Ozonation of Formaldehyde with an Oxygen-Vacancy-Rich MnOx/γ-Al2O3 Catalyst at Room Temperature

Development Of Active Oxide Catalysts For The Direct Oxidation Of Methane To Formaldehyde

Catalysts and reaction pathways for dehydrogenation and selective oxidation of methanol to methyl formate

The Enigma of Methanol Synthesis by Cu/ZnO/Al 2 O 3 -Based Catalysts

BOC-MP Study on the Mechanism of Partial Oxidation of CH3OH to HCHO over a Silver Surface and the Promoting Effect of Halogen to the Catalyst

The formation, reactivity and transformation pathways of formaldehyde in the methanol-to-hydrocarbon conversion

Selective oxidation of methane to formaldehyde over Mo/ZrO2 catalysts

Interfacial dependent reactive oxygen species generation over Pt-ZrO2 nanoparticles for catalytic oxidation of formaldehyde at room temperature

Characterization and Catalytic Performance of Zr-Mo-Oxide Catalysts for Selective Oxidation of Methane to Formaldehyde

Understanding the Dual Active Sites of the FeO/Pt(111) Interface and Reaction Kinetics: Density Functional Theory Study on Methanol Oxidation to Formaldehyde

A Review and Experimental Revisit of Alternative Catalysts for Selective Oxidation of Methanol to Formaldehyde

Bifunctional zeolites-silver catalyst enabled tandem oxidation of formaldehyde at low temperatures

Computational exploration of sub-nano Zn and Cu species on Cu/ZrO2: Implications for Methanol synthesis

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst for enhanced CO2 -methanol conversion at low temperature and pressure

Recent Progress on the Involvement of Formaldehyde in the Methanol‐to‐Hydrocarbons Reaction

Selective Oxidation of Methane into Methanol under Mild Conditions

Tailoring Interfacial Lewis Acid-Basic Pair on ZnO/4Mg1ZrOx Allows Dehydrogenative Α-Methylenation of Alcohols with Methanol to Allylic Alcohols

Hydrogen Transfer Reaction Contributes to the Dynamic Evolution of Zeolite-Catalyzed Methanol and Dimethyl Ether Conversions: Insight into Formaldehyde

Microrod networks CuO–ZnO–Al2O3 catalyst for methanol synthesis from CO2: Synthesis, characterization, and performance demonstration