Abstract:Solid-state lithium batteries (SSLBs) are the promising next-generation energy storage systems due to their attractive advantages in terms of energy density and safety. However, the interfacial engineering and battery building are of huge challenges, especially for stiff oxide-based electrolytes. Herein, we construct the SSLBs by co-sintering method using Li3BO3 as a sintering agent to bind the cathode materials LiNi0.6Mn0.2Co0.2O2 (NMC) and solid-state electrolytes Li6.4La3Zr1.4Ta0.6O12. Small NMC primary particles are compared with large secondary particles to study the effects on interfacial adhesion, mechanical retention, internal resistance evolution, and electrochemical performance. Our results reveal that the interfacial resistance decreases during charging and increases during discharging, resulting in an overall increase in interfacial resistance after one cycle. The main reason is attributed to the micro-cracks induced by the volumetric changes of NMC during electrochemical process. The mechanical degradations at the interfaces accumulated upon cycling can cause capacity decay and low Coulombic efficiency. The SSLB constructing from small NMC primary particles shows regulation of particle distribution, mitigation in local volumetric change and alleviations in mechanical degradation at the interfaces, leading to smaller resistance change and better electrochemical performance. The findings shed lights on the designing SSLBs with good mechanical retentions and electrochemical performance.

Interfacial Engineering for Advanced Solid-State Li-metal Batteries

Interfacial Modification, Electrode/Solid-Electrolyte Engineering, and Monolithic Construction of Solid-State Batteries

Interfacial Engineering at Cathode/LATP Interface for High-Performance Solid-State Batteries

Research progress on the interfaces of solid-state lithium metal batteries

Interfacial Challenges and Progress for Inorganic All-Solid-state Lithium Batteries

Interfacial compatibility issues in rechargeable solid-state lithium metal batteries: a review

Tailoring Interfacial Structures to Regulate Carrier Transport in Solid-State Batteries

Interfacial Reactions in Inorganic All-Solid-State Lithium Batteries

Research progress on interfacial problems and solid-state electrolytes in lithium batteries

Interface Issues and Challenges in All‐Solid‐State Batteries: Lithium, Sodium, and Beyond

Unlocking the Failure Mechanism of Solid State Lithium Metal Batteries

Super-conductive Plastic Crystal-Based Materials As the Interface Layers for Solid-State Lithium Metal Batteries

Designing solid-state interfaces on lithium-metal anodes: a review

Advances in Electrolyte–anode Interface Engineering of Solid‐state Lithium Metal Batteries

Interfaces: Key Issue To Be Solved For All Solid-State Lithium Battery Technologies

Interface Aspects in All‐Solid‐State Li‐Based Batteries Reviewed

Interfaces in Solid-State Lithium Batteries

Optimized Interfaces in Anti-Perovskite Electrolyte-Based Solid-State Lithium Metal Batteries for Enhanced Performance

Mitigating the Interfacial Degradation in Cathodes for High Performance Oxide-Based Solid-State Lithium Batteries.

The interfacial behaviours of all-solid-state lithium ion batteries

A Review on Engineering Design for Enhancing Interfacial Contact in Solid-State Lithium–Sulfur Batteries