Abstract:The real-time hybrid model (RTHM) test is adept at addressing the scale contradiction, the lack of fidelity in wind modelling in hydrodynamic testing facilities and spatial constraints inherent in conventional monopile-type offshore wind turbine (OWT) model testing methods, thus emerging as an effective avenue for conducting physical model tests of Monopile-type OWTs. This method entails the reproduction of aerodynamic loads or platform motions using loading device or vibration tables. Time delays in the physical attributes of the loading device and signal transmission processes within the system can result in error accumulation, with the potential to impact overall system stability. Moreover, time delay compensation algorithms for hybrid model test systems with force control loading can easily generate excessive noise, leading to system divergence. As a result, time delay has emerged as a technical challenge in the RTHM test. To address this issue, this paper has developed second-order and third-order polynomial extrapolation algorithms, alongside an adaptive compensation algorithm. The adaptive compensation algorithm employs the least squares method to identify parameters of the loading system, enabling it to address variations in the time delay of the experimental system caused by the nonlinearity of the loading system and changes in the physical properties of the model. The feasibility and effects of time delay compensation for various algorithms are validated through numerical simulation. Results indicate that the adaptive compensation algorithm surpasses second and third-order polynomial extrapolation compensation algorithms in terms of accuracy and compensation effectiveness. To validate the applicability of the adaptive compensation algorithm, a RTHM test was conducted. Across rotor thrust force (RotThrust) and tower top displacement, there was an average reduction of approximately 5 % and 9 % in the maximum and minimum synchronization errors, respectively. This highlights the efficacy of the delay compensation algorithm in practical applications, notably diminishing time delay errors within the experimental system. The adaptive compensation algorithm continuously adjusts and updates parameters, enhancing the adaptability of the compensation process to time-varying systems.

Multiscale Fluid–structure Coupled Real-Time Hybrid Simulation of Monopile Wind Turbines with Vibration Control Devices

Conceptual Study of a Real-Time Hybrid Simulation Framework for Monopile Offshore Wind Turbines under Wind and Wave Loads

Coupled aero-hydro-geotech real-time hybrid simulation of offshore wind turbine monopile structures

Real-time Hybrid Model Tank Testing for Aero-Hydro-servo-elastic Assessment of a Monopile Offshore Wind Turbine

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Mitigation of Side-to-side Vibration of a 10MW Monopile Offshore Wind Turbine under Misaligned Wind and Wave Conditions by an Active Torque Control

Aero-Hydro-Elastic-Servo Modeling and Dynamic Response Analysis of A Monopile Offshore Wind Turbine Under Different Operating Scenarios

Dynamic Analysis of 10 MW Monopile Supported Offshore Wind Turbine Based on Fully Coupled Model

Model Tests on the Long-Term Dynamic Performance of Offshore Wind Turbines Founded on Monopiles in Sand

Distributed real-time hybrid simulation method for dynamic response evaluation of floating wind turbines

Development and Verification of Real-Time Hybrid Model Test Delay Compensation Method for Monopile-Type Offshore Wind Turbines

A coupled numerical framework for hybrid floating offshore wind turbine and oscillating water column wave energy converters

Real-time hybrid model tests of floating offshore wind turbines: Status, challenges, and future trends

On the Size Effects of Toroidal Tuned Liquid Column Dampers for Mitigating Wind- and Wave-Induced Vibrations of Monopile Wind Turbines

Numerical Framework for the Coupled Analysis of Floating Offshore Multi-Wind Turbines

Lateral Vibration Control of Monopile Supported Offshore Wind Turbines with Toroidal Tuned Liquid Column Dampers

Study on Simulation of Real‐time Hybrid Model Test for Offshore Wind Turbines

Analytical Solution for Monopile Supported Offshore Wind Turbines Considering Soil-Pile-Water Interaction

Numerical Analysis of Passive Toroidal Tuned Liquid Column Dampers for the Vibration Control of Monopile Wind Turbines Using FVM and FEM

Structural vibration control of spar-buoy floating offshore wind turbines

Two-way coupling fluid–structure interaction analysis on dynamic response of offshore wind turbine