Dynamic characteristics of a two-stage compression and two-stage expansion Compressed Carbon dioxide energy storage system under sliding pressure operation
Yuan Zhang,Yitong Wu,Ke Yang
DOI: https://doi.org/10.1016/j.enconman.2022.115218
IF: 10.4
2022-02-01
Energy Conversion and Management
Abstract:Renewable energy can solve the environmental pollution problems caused by traditional fossil fuels, but its unstable nature also hinders its development and utilization. Energy storage technology is an effective way to cope with the problem of instability of renewable energy sources. Compressed CO2 Energy Storage (CCES) is a physical energy storage technology that has gained attention because of favorite physical properties of CO2. In view of the lack of research on the dynamic characteristics of CCES systems, a dynamic model of a two-stage compression and two-stage expansion CCES system was developed in this paper, and the dynamic characteristics of the energy storage system under sliding pressure conditions were analyzed. Evaluation criteria, such as roundtrip efficiency (RTE), heat recovery efficiency (HRE), and energy storage density (EVR) were defined to evaluate the dynamic characteristics of key parameters, components, and the system as a whole. In addition, the effects of key parameters, such as storage chamber volume, CO2 mass flow rate, and heat exchanger pinch point temperature difference, on the dynamic performance of the system were analyzed. The results showed that, under the design conditions, RTE was 64.29%, HRE was 91.79% and EVR was 210.17 kJ/m3. As to the effects of key parameters, when the storage chamber volume increased from 6000 m3 to 12000 m3, RTE increased by 1.91%, but EVR decreased by 32.32 kJ/ m3. The increase in CO2 mass flow rate decreased the RTE, but significantly increased the EVR. When the pinch point temperature difference increased from 3 K to 10 K, HRE increased by 5.79% while RTE decreased by 5.19%. The related research helps to enhance the understanding of CCES systems under dynamic conditions and provides an important reference for carrying out the optimal design of the systems.
energy & fuels,thermodynamics,mechanics