Evaluation of Fuel Spray Ignition Delay Behavior Using a Two-Stage Lagrangian Model

Yu Wang,Hesheng Bao,Bart Somers,Noud Maes

DOI: https://doi.org/10.1016/j.combustflame.2024.113449

IF: 4.4

2024-01-01

Combustion and Flame

Abstract:In this study, a two-stage Lagrangian (TSL) model is used to investigate the ignition process of a fuel spray under engine-like conditions. The existing two-reactor TSL model developed for quasi-steady flames is improved to simulate the ignition process of a fuel spray at engine-like conditions, by inserting a well-validated entrainment model for the liquid fuel spray. The ignition delays of n-dodecane and n-heptane sprays predicted by the improved TSL model are validated with Engine Combustion Network Spray A and Spray H data over a wide range of ambient temperatures and oxygen concentrations. The results show that the two-reactor TSL model is capable of capturing the complex interaction between turbulent mixing and chemistry at the spray core and periphery regions during ignition. A 4-step ignition process at intermediate temperatures is observed. First, 1st-stage ignition appears at the fuel-lean spray periphery when the local residence time reaches a critical value. Then, the transport prompts the 1st-stage ignition in the core region. After a kinetic-dominated 2nd-stage ignition in the fuel-rich core region, the flame propagates into the whole equivalence ratio space. At ambient temperatures that are considered relatively high for internal combustion engines, the 1st-stage and 2nd-stage ignition in the fuel-rich core region is so short that the 1st-stage ignition does not occur at the spray periphery, resulting in a 3-step ignition process. The high equivalence ratio in core region restricts the local temperature rise, and the 2nd-stage ignition finally appears at the spray periphery with an increasing local residence time and the transport from the core region. The effectiveness of the two-reactor TSL model also demonstrates the dominant role of transport in the multiple-step ignition process of a high-pressure liquid fuel spray.The ignition process of high-pressure liquid fuel sprays is of great interest in engine combustion research, but the simulation of this process is computationally costly. In this study, a reduced order, two-stage Lagrangian (TSL) model, is extended to ignition process simulations. Based on the configuration of two perfectly stirred reactors with a well-developed 1-D fuel spray entrainment sub-model, the TSL model is able to accommodate detailed chemical kinetic mechanisms. Validated by ECN Spray A and Spray H data, this model provides good predictions of ignition delay for fuel sprays at engine-like conditions. Moreover, this model explains the roles of transport and chemistry at the spray periphery and core regions during the multiple-step ignition process. The model developed in this study helps the understanding of the multiple-step ignition process, and it can also be of great significance in chemical mechanism development and validation.