Abstract:Abstract Degradation of electronic equipment is typically accompanied by a deviation in their electrical parameters from their design values. When the function of the electronic equipment fails, parametric faults of the electrical parameters will ultimately occur. Such electrical parameters can characterize the state of health can be defined as health parameters. For complex electronic equipment such as hardware circuits of Nuclear power plant DCS cards, the use of health parameters for fault diagnostic has been widely used, but there is no mature method for sub-health diagnostic. To address this problem, an electronic equipment health assessment method was developed using a technology based on the combination of mechanism knowledge and data-driven. The method first uses Physics of Failure approach and hardware circuit logic principle to identify the major failure mechanisms of the circuit, and then determines the key health parameters and their sub-health thresholds on this basis. The time series data under specific test conditions for the key health parameters of the circuits to be assessed is collected and compared with the sub-health thresholds, then the health status assessment results based on mechanism knowledge can be obtained. As well, the data-driven health assessment technology based on Mahalanobis distance is applied to analyze the real-time health parameter data of all samples, and the healthy outlier samples are identified and quantified, and the health status assessment results based on the data-driven technology can be obtained. The results of the two are comprehensively evaluated to finally determine the circuit health status. Practice was carried out on the DCDC chip of a nuclear power DCS analog output module, and the results showed that this method was feasible for engineering.

Condition Monitoring of Discrete Power Devices: A Data-Driven Approach with Stress Quantification and Mold Temperature Sensing

Digital Twin Based Condition Monitoring for High Power Converters

Research on Transformer Based Online Condition Monitoring Method for IPM

A New Condition Assessment Method for Distribution Transformers Based on Operation Data and Record Text Mining Technique

Heat-Flux-Based Condition Monitoring of Multichip Power Modules Using a Two-Stage Neural Network

Condition Monitoring for Nuclear Turbines with Improved Dynamic Partial Least Squares and Local Information Increment

Condition Monitoring the Health Status of Forced Air Cooling System Using the Natural Frequency of Thermal Network

A Data-Driven Condition Monitoring Method for Capacitor in Modular Multilevel Converter (MMC)

A Novel Condition Monitoring Method for Full Modes of Package Degradation in High Power Modules Based on Hysteresis Curves of Forward Voltage Drop

Estimating Health Condition of the Wind Turbine Drivetrain System

Condition Monitoring of Distribution Power Network Assets Using PMU Measurements

A vibration based condition monitoring system for power transformers

A Digital Twin Based Condition Monitoring Method for Power Modules of Inverters

Health State Estimation and Remaining Useful Life Prediction of Power Devices Subject to Noisy and Aperiodic Condition Monitoring

Research on a Circuit Health Assessment Technology Combining Mechanism Knowledge and Data Driven Technology

Data-Driven Condition Monitoring Approaches to Improving Power Output of Wind Turbines

Online Condition Monitoring Methodology for Power Electronics Package Reliability Assessment

Data-Driven Condition Monitoring of Data Acquisition for Consumers’ Transformers in Actual Distribution Systems Using T-Statistics

Condition monitoring and diagnosis of power equipment: review and prospective

Comparative Study of Neutral-Voltage-Based and Leakage-Current-Based Online Condition Monitoring Methods for Stator Insulation of Inverter-Fed Machines

Power Transformer Condition Assessment by On-Line Monitoring and Trend Analysis