Abstract:Latent heat storage technology has made significant contributions to solving the problem of unstable renewable energy supply. Related research indicates that phase change devices are essential for the stability of spacecraft temperature control systems. However, phase change material (PCM) has low thermal conductivity, which reduces device thermal storage and release efficiency. Moreover, the PCM heat transfer performance is further affected by movements such as attitude adjustment during the launch and operation of spacecraft. This paper adopted active heat transfer enhancement technology to enhance uniformity and rate of heat transfer in latent heat thermal energy storage (LHTES) unit. A new method is presented on flipping LHTES unit at appropriate stages of the phase change process, namely flipping enhancement technology. This method effectively uses the benefits of natural convection to enhance heat transfer, reducing the storage and release time of LHTES systems. A physical model was established building upon verification with data in literature, and the effect of flipping under different phase transition fractions on melting and solidification performance within the square cavity was discussed through numerical simulation. Further analysis was conducted on factors including phase transition fraction, phase interface, temperature interface distribution, velocity interface distribution, and heat storage capacity. Finally, the response surface methodology (RSM) was adopted to analyze and determine the optimal flipping phase transition fraction. The research results indicate that flipping improves the heat transfer efficiency of LHTES. Flipping significantly enhances heat transfer 3-5 times during melting compared to solidification process. As the phase transition fraction increases, the complete melting/solidification time demonstrates a trend of decline followed by an increase. Through single factor analysis, the optimal flipping liquid fraction is 51.65 % during the melting process, leading to a substantial decrease in complete melting time by 25.71 %. Based on this, the optimal phase transition fraction combination of melting first and then solidification was explored, which shortened the melting-solidification full cycle time by 12.96 %. This study investigates the melting/solidification performance of LHTES unit under flip conditions, which guides the design of phase change thermal control devices and contributes to the field of spacecraft thermal management.

Investigation on Heat Transfer Efficiency of Phase Change Materials Enhanced by Divided Heat Flux

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Melting Performance Enhancement of Phase Change Material by a Limited Amount of Metal Foam: Configurational Optimization and Economic Assessment

Heat transfer enhancement performance of microencapsulated phase change materials latent functional thermal fluid in solid/liquid phase transition regions

Melting Performance Analysis of Phase Change Materials in Different Finned Thermal Energy Storage

Improving the melting performance of phase change material (PCM) in a latent heat thermal energy storage unit via a non-uniform arrangement of longitudinal fin

Comprehensive performance analysis and structural improvement of latent heat thermal energy storage (LHTES) unit using a novel parallel enthalpy-based lattice Boltzmann model

Heat Transfer Enhancement Technique of PCMs and Its Lattice Boltzmann Modeling

Analysis of heat transfer and fluid flow during the melting process of PCM within tubular thermal energy storage unit

Melting and Solidification Performance of Latent Heat Thermal Energy Storage System under Flip Condition

Numerical Study on the Combined Application of Multiple Phase Change Materials and Gradient Metal Foam in Thermal Energy Storage Device

Pioneering heat transfer enhancements in latent thermal energy storage: Passive and active strategies unveiled

Investigation of the Effect of Thermal Resistance on the Performance of Phase Change Materials

Thermal and Fluid Characteristics of a Latent Heat Thermal Energy Storage Unit

Thermal Performance Analysis of Latent Heat Thermal Energy Storage with Cascaded Phase Change Materials Capsules under Varying Inlet Temperature

Heat transfer enhancement of phase change materials embedded with metal foam for thermal energy storage: A review

Analyzing competing effects between heat transfer area and natural convection to enhance heat transfer in latent heat storage

Experimental and numerical assessments of thermal transport in phase change material embedding additively manufactured triply periodic minimal surfaces: A comparative evaluation

Studies on performance enhancement of heat storage system with multiple phase change materials

Heat transfer investigation on the thermal energy storage using phase change material in low-carbon building