Abstract:China is planning to construct a new space-borne gravitational-wave (GW) observatory, the TianQin project, in which the spaceborne telescope is an important component in laser interferometry. The telescope is aimed to transmit laser beams between the spacecrafts for the measurement of the displacements between proof-masses in long arms. The telescope should have ultra-small wavefront deviation to minimize noise caused by pointing error, ultra-stable structure to minimize optical path noise caused by temperature jitter, ultra-high stray light suppression ability to eliminate background noise. In this paper, we realize a telescope system design with ultra-stable structure as well as ultra-low wavefront distortion for the space-based GW detection mission. The design requirements demand extreme control of high image quality and extraordinary stray light suppression ability. Based on the primary aberration theory, the initial structure design of the mentioned four-mirror optical system is explored. After optimization, the maximum RMS wavefront error is less than lamda/300 over the full field of view (FOV), which meets the noise budget on the telescope design. The stray light noise caused by the back reflection of the telescope is also analyzed. The noise at the position of optical bench is less than 10-10 of the transmitted power, satisfying the requirements of space gravitational-wave detection. We believe that our design can be a good candidate for TianQin project, and can also be a good guide for the space telescope design in any other similar science project.

Optical Design and Optimization of Space High-Cadence Observing Telescope (SHOT)

Optical Design and Optimization of Space High-cadence Observing Terahertz-telescope (SHOT)

Multishot Hyperspectral Imaging Based on Tunable Diffractive Lenses

Design of detection optical system with large relative aperture

Development of Kinetic Inductance Bolometers for the Space High-Cadence Observing Telescope

Design of a high throughput telescope based on scanning off-axis Three-Mirror Anastigmat system

Optical design of a multi-object fiber-fed spectrograph system for Southern Spectroscopic Survey Telescope

Design of Observational and Control System of Imaging System of a 1.2-Meter-aperture Telescope

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Recommended high performance telescope system design for the TianQin project

Large Field and High Precision Optical System for Star Tracker

A new configuration for a 10-metre optical/infrared telescope

Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

Geometry and optics calibration of WFCTA prototype telescopes using star light

Optical Design of the Space Observation Camera with Long Focal Length and Wide Field of View

Design of a Spaceborne, Compact, Off-Axis, Multi-Mirror Optical System Based on Freeform Surfaces

Conceptual Design of the Optical System of the 6.5m Wide Field Multiplexed Survey Telescope with Excellent Image Quality

Optical design and coating optimization of the Wolter-I X-ray telescope

Wide-field Optical Design for a 60 M Submillimeter Telescope

Optical Optimization for Anti-Coincidence Detectors of a Hard X-ray Modulation Telescope

A Large Field of View Optical System Design for Space Target Detection