Abstract:Solar energy utilization will play an increasingly important role in sustainable urban development because it will help motivate low-carbon development. This study proposed a framework that calculates the solar irradiance on roofs and facades of city-scale buildings, as well as the potential reductions in energy consumption and CO2 emissions that can be derived from solar energy utilization. This framework consolidates data acquired using 3D remote sensing techniques (e.g., light detection and ranging (LiDAR) data and digital photogrammetry) with existing 3D building vector models from urban planning and building design. To further the economical use of solar energy, the framework provides a new strategy based on three aspects (threshold, structure, and orientation), for a more realistic analysis of the available area of roofs and facades, by combining street view images and point clouds. Nanjing, China, was selected as a study area for validating and analyzing the proposed framework. The experimental area covers approximately 30 km(2) and 5216 buildings. The reliability of the proposed method was validated by comparing the results with the computation modules of mainstream commercial programs and previous international studies. The following conclusions were drawn from the experimental area. (1) Annual solar energy on the roofs of all buildings was 9647.89 GWh, corresponding to a PV yield of 1447.18 GWh, which equates to reductions of 584.66 kt in standard coal consumption and 1261.94 kt in CO2 emissions. The annual solar energy on the facades was 5364.63 GWh, corresponding to a PV yield of 804.69 GWh, which equates to reductions of 325.10 kt in standard coal consumption and 701.69 kt in CO2 emissions. (2) Based on the calculated potential solar energy utilization of the building envelopes, it was shown that the utilization of solar radiation on roofs and facades would promote low-carbon urban development. The utilization of solar energy on the facades of high buildings will contribute to the supply of energy for these buildings and help balance their energy consumption. (3) As the solar incidence angle changes over time, the reductions in energy consumption and CO2 emissions related to PV power generation are maximal in summer for building roofs, whereas no significant seasonal differences were observed for facades. (4) Incorporating the available area translates the utilization of solar energy and potential CO2 reductions from theory to practical application by reducing inefficient and invalid areas. The percentages of available area of roof and facade were estimated at 47% and 16% by comprehensive calculations considering three aspects (threshold, structure, and orientation). The corresponding potential of solar energy on the roofs and facades in the validation area B are 167.18 GWh and 53.63 GWh, respectively, compared to the original theoretic values of 316.97 GWh and 237.98 GWh.

Shaping urban form for solar energy self-sufficiency city

Evaluation of Solar Radiation Models on Vertical Surface for Building Photovoltaic Applications in Beijing

From Urban Design to Energy Sustainability: How Urban Morphology Influences Photovoltaic System Performance

Solar Energy Potential Using Gis-Based Urban Residential Environmental Data: A Case Study of Shenzhen, China

Integrated physical approach to assessing urban-scale building photovoltaic potential at high spatiotemporal resolution

Impact of urban form on building energy consumption and solar energy potential: A case study of residential blocks in Jianhu, China

Estimating Roof Solar Energy Potential in the Downtown Area Using A Gpu-Accelerated Solar Radiation Model and Airborne Lidar Data

Assessing the potential and utilization of solar energy at the building-scale in Shanghai

A novel 3D-geographic information system and deep learning integrated approach for high-accuracy building rooftop solar energy potential characterization of high-density cities

Energy Utilization and Carbon Reduction Potential of Solar Energy in Residential Blocks: A Case Study on a Tropical High-Density City in China

An Estimation of the Available Spatial Intensity of Solar Energy in Urban Blocks in Wuhan, China

Planning the installation of building-integrated photovoltaic shading devices: A GIS-based spatiotemporal analysis and optimization approach

Influence of urban morphological factors on building energy consumption combined with photovoltaic potential: A case study of residential blocks in central China

RETRACTED: Calculating Potential of Solar Energy and CO2 Emissions Reduction for Cityscale Buildings Based on 3D Remote Sensing Technologies

Global Estimation of Building-Integrated Facade and Rooftop Photovoltaic Potential by Integrating 3D Building Footprint and Spatio-Temporal Datasets

Solar Energy Potential of Urban Buildings in 10 Cities of China

Evaluation Model of Distributed Photovoltaic Utilization in Urban Built-Up Area

Unlocking Solar Potential in High-Latitude Urban Areas: A Study of Morphological Indicators and Zero Energy Potential of Glasgow

Photovoltaic Potential Estimation for Various Surface Components of Urban Residential Buildings Based on Industry Foundation Classes Data

Examining nonlinear effects of socioecological drivers on urban solar energy development in China using machine learning and high-dimensional data