Abstract:Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is one of the most popular conducting polymers and widely used as polymer thermoelectric materials, and its thermoelectric performance could be improved by a variety of post-treatment processes. This paper reported two series of post-treatment methods to enhance the thermoelectric performance. The first series method included pre-treatment of PEDOT:PSS film with formamide, followed by imidazolium-based ionic liquids. The second series method included pre-treatment of PEDOT:PSS film with formamide, followed by sodium formaldehyde sulfoxylate, and finally imidazolium-based ionic liquids. Two series of post-treatment methods significantly improved the power factor of PEDOT:PSS when compared to that of PEDOT:PSS treated with formamide only. For example, using the first series post-treatment method with 40 vol.% ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl) amide, the Seebeck coefficient of the PEDOT:PSS film increased from 14.9 to 28.5 μV/K although the electrical conductivity reduced from 2,873 to 1,701 S/cm, resulting in a substantial improvement in the overall power factor from 63.6 to 137.8 μW/K<sup>2</sup>m. The electrical conductivity enhancement in the formamide-treatment process was in part ascribed to the removal of the insulating PSS component. Further treatment of PEDOT:PSS film with ionic liquid caused dedoping of PEDOT and hence increased in Seebeck coefficient. In contrast, second series post-treatment method led to the reduction in electrical conductivity from 2,873 to 641 S/cm but a big improvement in the Seebeck coefficient from 14.9 to 61.1 μV/K and thus the overall power factor reached up to ~239.2 μW/K<sup>2</sup>m. Apart from the improvement in electrical conductivity, the increase in Seebeck coefficient is on account of the substantial dedoping of PEDOT polymer to its neutral form and thus leads to the big improvement of its Seebeck coefficient. The environmental stability of ionic liquid-treated PEDOT:PSS films were examined. It was found that the ionic liquid treated PEDOT:PSS retained more than 70% Seebeck coefficient and electrical conductivity at 75% RH humidity and 70°C for 480 h. The improved long-term TE stability is attributed to the strong ionic interaction between sulfonate anions and bulky imidazolium cations that effectively block the penetration of water and lessen the tendency to take up water from the air.

Enhanced Thermoelectric Performance of Vapor Phase Polymerized PEDOT‐Tos Via Ionic Liquid Post‐Treatment

Enhanced thermoelectric performance of PEDOT: PSS films via ionic liquid post-treatment

Improved Thermoelectric Properties and Environmental Stability of Conducting PEDOT:PSS Films Post-treated With Imidazolium Ionic Liquids

Significantly Enhanced Thermoelectric Properties of PEDOT:PSS Films through Sequential Post‐Treatments with Common Acids and Bases

Solution processed intrinsically conductive polymer films with high thermoelectric properties and good air stability

High-Performance Post-Treatment-Free Pedot Based Thermoelectric with the Establishment of Long-Range Ordered Conductive Paths

Two-step surface treatment of femtosecond laser irradiation and ionic liquid to enhance thermoelectric properties of PEDOT:PSS films

PEDOT:PSS Films With Very High Thermoelectric Properties Through Water‐Swollen Assisted Reduction With a Tetrakis(dimethylamino)ethylene Solution

High-performance Thermoelectric PEDOT:PSS Fiber Bundles Via Rational Ionic Liquid Treatment

A Polymer Film with Very High Seebeck Coefficient and Overall Thermoelectric Properties by Secondary Doping, Dedoping Engineering and Ionic Energy Filtering

High-Performance PEDOT:PSS Flexible Thermoelectric Materials and Their Devices by Triple Post-Treatments

One-step post-treatment boosts thermoelectric properties of PEDOT:PSS flexible thin films

Enhancement of Conductivity and Thermoelectric Property of PEDOT:PSS Via Acid Doping and Single Post‐Treatment for Flexible Power Generator

Enhancement of the thermoelectric properties of PEDOT:PSS via one-step treatment with cosolvents or their solutions of organic salts

Ultrafast Laser‐Induced Excellent Thermoelectric Performance of PEDOT:PSS Films

Polymer Films with Ultrahigh Thermoelectric Properties Arising from Significant Seebeck Coefficient Enhancement by Ion Accumulation on Surface

High Thermoelectric Performance in Solution‐Processed Semicrystalline PEDOT:PSS Films by Strong Acid–Base Treatment: Limitations and Potential

Deciphering the superior thermoelectric property of post-treatment-free PEDOT:PSS/IL hybrid by X-ray and neutron scattering characterization

High thermoelectric performance of spray-coated Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films enabled by two-step post-treatment process

Two-step post-treatment to deliver high performance thermoelectric device with vertical temperature gradient

Roles of Polyethylenimine Ethoxylated in Efficiently Tuning the Thermoelectric Performance of Poly(3,4-ethylenedioxythiophene)-Rich Nanocrystal Films.