Abstract:Electro-reduction of O2 to generate H2O2 is an attractive alternative to the current anthraquinone process and quietly necessary for the chemical industries and environmental remediation. It is general that sufficient porous structure contributes to expose more catalytic active sites and shorten diffusion paths for the heterogeneous catalysis of O2. In this work, initially, the Fe3O4 nanoparticles embedded graphite felt (Fe3O4@GF) is prepared through a mild hydrothermal following with thermal reduction method. This special combination not only provides iron source for the electro-Fenton reaction, but also supplies rich active sites from the Fe3O4 embedded structure with abundant cracks, which are beneficial to increase the reaction rate. Compared with raw graphite felt (RGF), the fresh Fe3O4@GF exhibits superior pollutant degradation kinetics with more than 400% increase and approximately 37.8% improvement to the removal of total organic carbon. 98% decolorization of rhodamine B (RhB) can be achieved in just 5 minutes, and quickly complete 100% removal of RhB in the next few seconds. As the electro-Fenton reaction progresses, Fe3O4 dissolves in the electrolyte, leaving porous structure on the surface of the GF to form a porous GF (PGF), and the rapid radical reaction activates GF surface. Both the chemical etching of Fe3O4 and the electro-Fenton process can further increase the specific surface area, defects and actives sites of the electrode. As expected, the active PGF exhibits favorable performance of H2O2 production among in pH=1 (320.0±36.5 mg L-1), 3 (301.9±13.2 mg L-1) and 7 (320.4±21.2 mg L-1) electrolyte. The degradation performance of PGF does not significantly decay even after 20 times repeated use, indicating the good structural stability and long-term durability. The superiority of the in-situ Fe source and fast reaction kinetics for electro-Fenton of Fe3O4@GF is confirmed, and this holey-engineered strategy also provides the possibility to achieve swift water purification and open up a new way for developing efficient carbon-based electrodes.

Enhancing H2O2 Production with a Self-Breathing Gas Diffusion Electrode Fabricated Via Ultrasonic Impregnation and Vacuum Filtration

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Enhanced H2O2 Utilization Efficiency in Fenton-like System for Degradation of Emerging Contaminants: Oxygen Vacancy-Mediated Activation of O2.

Efficient electrosynthesis of H 2 O 2 through electrodeposition-modified cathode and side-aeration integration

Integrated and Superaerophilic Ni-O-C Electrode enables Fast and Stable Electrochemical H2O2 Production for Electro-Fenton-like Process

Designing a Self-Breathing Electrode Modulated by Spatial Hydrophobic Microenvironments with Stabilized H2O2 Generation for Wastewater Treatment

A novel dual gas diffusion electrodes system for efficient hydrogen peroxide generation used in electro-Fenton

Engineering a concordant microenvironment with air-liquid-solid interface to promote electrochemical H2O2 generation and wastewater purification

Fast and Stable Electrochemical Production of H 2 O 2 by Electrode Architecture Engineering

Activated carbon filled in a microporous titanium-foam air diffusion electrode for boosting H2O2 accumulation

Oxygen vacancy based WO3/SnO2-x promote electrochemical H2O2 accumulation by two-electron water oxidation reaction and toxic uniform dimethylhydrazine degradation

Novel Gas Diffusion Electrode System for Effective Production of Hydrogen Peroxide

Simultaneously Providing Iron Source towards Electro-Fenton Process and Enhancing Hydrogen Peroxide Production via a Fe3O4 Nanoparticles Embedded Graphite Felt Electrode.

H2O2 production at gas-diffusion cathodes made from agarose-derived carbons with different textural properties for acebutolol degradation in chloride media

Self-Growing MZIF8/GDE Bonding by N–Zn–O Boosts Electrochemical Oxygen Reduction to H 2 O 2

Improving the yield of hydrogen peroxide on gas diffusion electrode modified with tert-butyl-anthraquinone on different carbon support

Janus graphite felt cathode dramatically enhance the H2O2 yield from O2 electroreduction by the hydrophilicity-hydrophobicity regulation

Anti-electrowetting carbon film electrode with self-sustained aeration for industrial H2O2 electrosynthesis

Anthraquinone-catalyzed H2O2 Electrosynthesis Coupled with an Advanced Oxidation Process for Water Treatment

Synergy of oxygen reduction for H2O2 production and electro-fenton induced by atomic hydrogen over a bifunctional cathode towards water purification

Highly efficient electrosynthesis of hydrogen peroxide through the combination of side aeration and vacuum filtration modified graphite felt