Abstract:Integrating Phase Change Material (PCM) with building envelope is a promising way to reduce building energy consumption. However, leakage and insufficient PCM loading rate for existing encapsulation strategies limit its further application. In this work, a safer and easier way to fabricate Shape-Stable Phase Change Material (SSPCM) is proposed, whose products combine the outstanding leakage-proof property and high PCM loading rate. With the method of in-situ polymerization, not only the Polyethylene Glycol (PEG) is packaged by Polymethyl Methacrylate (PMMA), but the Expanded Graphite (EG) also has a chance to be added as the property regulator. The prepared SSPCMs are proved to be shape-stable over melting temperature with a leakage rate under 1 %. The characterization test reveals that with EG mass fraction increase from 0 to 2.5 %, the thermal conductivity augments from 0.23 to 1.73 W/(mK) while the phase change latent enthalpy changes from 85.11 kJ/kg to 116.10 kJ/kg. Notably, the EG is more than a thermal conductivity enhancer, it also plays an important role in the modification of comprehensive properties. To optimize the building energy-saving performance of SSPCMs, the factors affecting building cooling electricity consumption like deployment position and thermal properties are evaluated in detail. The simulation results show that the optimum strategy is employing SSPCM with 2.0 wt% EG in the middle of the envelope, the cooling electricity consumption can be reduced by 8.64 % compared with the benchmark. The physical mechanism of energy-saving is also discussed from multiple angles. From a statistical view, sensitivity and uncertainty analysis of the simulation results is completed, to identify the influence of input parameters and validate the reliability of the simulation results. Finally, an economic analysis is carried out, proving the economic feasibility for further application. This research provides valuable insights for SSPCM's application and design of energy-efficient buildings.

Thermophysical Properties and Energy-Saving Efficiency of Phase Change Microcapsule Foamed Cement Composite Insulation Materials

Thermal Conductivity of Aerated Concrete (AC) Composites Containing Micro-Encapsulated Phase Change Materials

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

The thermal performances of cement-based materials with different types of microencapsulated phase change materials

A foamed cement blocks with paraffin/expanded graphite composite phase change solar thermal absorption material

Synthesis of phase change microcapsules with binary fatty acid ester core and their feasibility investigation in energy conservation of cementitious materials

Enhanced thermo-mechanical properties of cementitious composites via red mud-based microencapsulated phase change material: Towards energy conservation in building

Thermal performance and economy of PCM foamed cement walls for buildings in different climate zones

Thermal performance of a building envelope including microencapsulated phase change materials (PCMs): A multiscale experimental and numerical investigation

A Novel Phase-Change Cement Composite for Thermal Energy Storage: Fabrication, Thermal and Mechanical Properties

The cores regulation of paraffin-chitosan phase change microcapsules for constant temperature building

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Microencapsulated phase change n-Octadecane with high heat storage for application in building energy conservation

Experimental and Numerical Investigation of Composite Phase Change Materials for Building Energy Saving

Research on enhancing thermal conductivity of phase change microcapsules with nano-copper

Experimental Study on Preparation of a Novel Foamed Cement with Paraffin/ Expanded Graphite Composite Phase Change Thermal Energy Storage Material

Application of Monodisperse Encapsulated Phase Change Materials in Building Thermal Energy Storage

Fabrication and Building Energy-Saving Performance Evaluation of Polyethylene Glycol/polymethyl Methacrylate/expanded Graphite Thermal Enhanced Shape-Stable Phase Change Material

A novel measurement method of thermal performances for an improved thermal storage concrete with microencapsulated phase change materials

Study on properties of phase change foam concrete block mixed with paraffin / fumed silica composite phase change material

Preparation and characterization of carbon nanotube microcapsule phase change materials for improving thermal comfort level of buildings