Abstract:The ARC pilot plant conceptual design study has been extended beyond its initial scope [B. N. Sorbom et al., FED 100 (2015) 378] to explore options for managing ∼525 MW of fusion power generated in a compact, high field (B0 = 9.2 T) tokamak that is approximately the size of JET (R0 = 3.3 m). Taking advantage of ARC’s novel design – demountable high temperature superconductor toroidal field (TF) magnets, poloidal magnetic field coils located inside the TF, and vacuum vessel (VV) immersed in molten salt FLiBe blanket – this follow-on study has identified innovative and potentially robust power exhaust management solutions. The superconducting poloidal field coil set has been reconfigured to produce double-null plasma equilibria with a long-leg X-point target divertor geometry. This design choice is motivated by recent modeling which indicates that such configurations enhance power handling and may attain a passively-stable detachment front that stays in the divertor leg over a wide power exhaust window. A modified VV accommodates the divertor legs while retaining the original core plasma volume and TF magnet size. The molten salt FLiBe blanket adequately shields all superconductors, functions as an efficient tritium breeder, and, with augmented forced flow loops, serves as an effective single-phase, low-pressure coolant for the divertor, VV, and breeding blanket. Advanced neutron transport calculations (MCNP) indicate a tritium breeding ratio of ∼1.08. The neutron damage rate (DPA/year) of the remote divertor targets is ∼3–30 times lower than that of the first wall. The entire VV (including divertor and first wall) can tolerate high damage rates since the demountable TF magnets allow the VV to be replaced every 1–2 years as a single unit, employing a vertical maintenance scheme. A tungsten swirl tube FLiBe coolant channel design, similar in geometry to that used by ITER, is considered for the divertor heat removal and shown capable of exhausting divertor heat flux levels of up to 12 MW/m2. Several novel, neutron tolerant diagnostics are explored for sensing power exhaust and for providing feedback control of divertor conditions over long time scales. These include measurement of Cherenkov radiation emitted in FLiBe to infer DT fusion reaction rate, measurement of divertor detachment front locations in the divertor legs with microwave interferometry, and monitoring “hotspots” on the divertor chamber walls via IR imaging through the FLiBe blanket.

Conceptual Design of the Tail Research Experiment at the Space Plasma Environment Research Facility(SPERF-TREX)

Conceptual Design of the Tail Research EXperiment in Space Plasma Environment Research Facility (SPERF-TREX)

Design and construction of the near-earth space plasma simulation system of the Space Plasma Environment Research Facility

Design and construction of the magnetic mirror magnets of the space plasma environment research facility (SPERF)

Design of Three-Dimensional Magnetic Probe System for Space Plasma Environment Research Facility (SPERF)

Topological analysis of three-dimensional magnetic reconnection in SPERF-AREX for simulated magnetopause events

Design and construction of the dipole magnet of the space plasma environment research facility (SPERF) for simulating the earth magnetosphere

Design and construction of the magnetopause shape control coils of the Space Plasma Environment Research Facility to regulate the field configuration of the simulated Earth's magnetopause magnetic reconnection

Design and construction of the Flux Core coils of the Space Plasma Environment Research Facility (SPERF)

Design and construction of the magnetic perturbation magnets of the space plasma environment research facility for simulating the geomagnetic storm on the ground

Numerical Analysis of Three-Dimensional Magnetopause-Like Reconnection Properties by Hall MHD Simulation for SPERF-AREX

Design and First Tests of the Trapped Electrons Experiment T-REX

Design, characterization, and modeling of the Charge eXchange Recombination Spectroscopy (CXRS) suite at the SMall Aspect Ratio Tokamak (SMART)

Magnetic diagnostics layout design for CFETR plasma equilibrium reconstruction

Conceptual design study for heat exhaust management in the ARC fusion pilot plant

Progress of the Keda Torus Experiment Project in China: Design and Mission

Equilibrium Reconstruction Method for Self-Organized Plasmas on Reversed Field Pinches with Polarimeter-Interferometer

Three-dimensional measurement of a stationary plasma plume with a Faraday probe array

PROTO-SPHERA: a magnetic confinement experiment which emulates the jet + torus astrophysical plasmas

Engineering design of the CFETR machine

Progress of Concept Design for CFETR Diagnostic System