Abstract:Steel slag and phosphogypsum are industrial wastes produced during steelmaking and the wet phosphoric acid process, respectively, contributing to significant environmental challenges due to their low utilization rates. This study explores their combination with GBFS to develop a new ecofriendly cementitious material based on steel slag. The effects of initial factors on early properties were systematically investigated using an orthogonal test. Hydration and microstructural characteristics were obtained through analysis of hydration processes, product characteristics, microstructure, and pore structure, and hydration behaviors were postulated. The findings reveal that a lower steel slag-GBFS ratio leads to a higher strength of the composite system. A higher water-binder ratio leads to a longer setting time and greater fluidity. The composite exhibits a low exothermic reaction, characterized by three exothermic peaks on its hydration heat release curve. The primary hydration products are Ettringite and C-(A)-S–H gel. Gypsum acts as an intermediate product. The main reaction in the composite system is that bassanite first transforms into gypsum. Concurrently, the [SiO 4 ] 4− , and [AlO 4 ] 5− in steel slag and GBFS gradually depolymerize. Once the conversion of hemihydrate gypsum is completed, the gypsum begins to dissolve, forming the primary hydration products. As hydration progresses, the system gradually forms a structure where ettringite intertwines, with gel filling and encapsulating the ettringite. The composite exhibits a loose pore structure in the early stages, leading to lower mechanical performance. Strength increases rapidly from 3 to 7 d. In the later hydration stages, the volume of harmful pores increases again, which subsequently moderates the strength gain. Nevertheless, under optimal conditions, compressive strength reaches 34.1 MPa at 28 d.

Effects of Ettringite Seed on the Hydration and Properties of Supersulphated Phosphogypsum-Slag Cement

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

An Eco-Friendly Phosphogypsum-Based Cementitious Material: Performance Optimization and Enhancing Mechanisms

Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime

Greener phosphogypsum-based all-solid-waste cementitious binder with steel slag activation: Hydration, mechanical properties and durability

Role of polyferric sulphate in hydration regulation of phosphogypsum-based excess-sulphate slag cement: A multiscale investigation

Hydration and Compressive Strength of Supersulfated Cement with Low-Activity High Alumina Ferronickel Slag

Effect of Ettringite Seed Crystals on the Properties of Calcium Sulphoaluminate Cement

Mechanical properties and hydration mechanism of super-sulfated cement prepared with ordinary Portland cement, carbide slag, and sodium silicate

Effect of modified phosphogypsum on the hydration properties of the phosphogypsum-based supersulfated cement

Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation

Effect of calcium sulfoaluminate cement on the hydration process and water resistance of phosphogypsum slag cement

Recycling utilization of phosphogypsum in eco excess-sulphate cement: Synergistic effects of metakaolin and slag additives on hydration, strength and microstructure

Investigation on the basic performance of the sustainable alkali-activated slag blended with sulphidic copper tailings

The mechanical properties and sustainability of phosphogypsum-slag binder activated by nano-ettringite

Utilizations of preheated flue gas desulfurization gypsum and sulfate compositions to modify performances of super-sulfated cement

Preparation of steel slag-based cementitious materials compounded with GBFS and phosphogypsum: mix design, hydration, and microstructure characteristic

Utilizing Spodumene Slag As a Supplementary Cementitious Material: a Quantitative Study

Setting Time Optimization of Excessive-Sulfate Phosphogypsum Slag Cement for Self-Compacting Concrete Based on a Paste Rheological Threshold Theory

Enhancement of ultra-fine slag on compressive strength of solid waste-based cementitious materials: Towards low carbon emissions

Investigation on mechanical properties of excess-sulfate phosphogypsum slag cement: From experiments to molecular dynamics simulation