Abstract:A coupled thermo-metallo-mechanical model is proposed to analyse the temperature, stress and microstructure fields in multi-pass welding of P92 pipes. An axisymmetric model is adopted to increase the efficiency of the simulation. To preserve the temperature field from a three-dimensional (3D) analysis, a procedure is proposed to convert the 3D result into a two-dimensional (2D) form, which is compared to temperature fields created by other 2D heat transfer analyses. A metallurgical algorithm, which does not need the calibration with metallurgical experiments, is implemented in the finite element (FE) analysis to predict spatial distributions of product phases during multi-pass welding. Comparison between the predictions and the metallurgical graphs is made to verify the effectiveness of the metallurgical analysis after twenty thermal cycles. Hardness test is also employed to characterize the microstructure and to validate the metallurgical predictions. Five temperature fields, one created from the newly proposed approach and four from existent ones, are used as external loads to conduct the mechanical analysis. The volumetric change due to the phase transformation is considered as an extra volumetric strain, which is implemented by user subroutine. The stress distributions predicted using the five temperature fields are plotted together with the 3D stress result to examine the effectiveness of the developed procedure. The stress at the external surface of the pipe is measured by the X-ray diffraction technique, and is further compared to the stress predictions. The advantage of the model is demonstrated by comparing the computational time consumed in the mechanical analysis.

Mechanical Behaviour Analysis of Steel Strips Reinforced Thermoplastic Pipe under Torsion

Short-Term Mechanical Analysis of Polyethylene Pipe Reinforced by Winding Steel Wires Using Steel Wire Spiral Structural Finite Element Model

Mechanical Responses of Metallic Strip Flexible Pipes Subjected to Pure Torsion

Mechanical Behaviors Of Steel Strip Reinforced Flexible Pipes Under Bending

Buckling Stability of Steel Strip Reinforced Thermoplastic Pipe Subjected to External Pressure

INVESTIGATION ON MECHANICAL PROPERTIES OF FIBREGLASS REINFORCED FLEXIBLE PIPES UNDER TORSION

Mechanical Behavior of Metallic Strip Flexible Pipe Subjected to Tension

Analysis of Reinforced Thermoplastic Pipe (RTP) under Axial Loads

Testing, simulation, and design for analyzing the behavior of lined pipes under torsion

MECHANICAL BEHAVIORS OF METALLIC STRIP FLEXIBLE PIPE UNDER AXISYMMETRIC LOADS

Investigation on the mechanical properties of the reinforced thermoplastic pipe (rtp) under internal pressure

Behaviour of Reinforced Thermoplastic Pipe (RTP) under Combined External Pressure and Tension

Analysis of steel strip reinforced thermoplastic pipe under internal pressure

Study on reinforced thermoplastic pipe under combined tension and internal pressure

Failure Behavior Analysis of Steel Strip–reinforced Flexible Pipe under Combined Tension and Internal Pressure

Torsional Response Analysis of Flexible Pipe Based on Theory and Finite Element Method

Buckling of Reinforced Thermoplastic Pipe (rtp) under Combined Bending and Tension

Analyses on the Short-Term Mechanical Properties of Plastic Pipe Reinforced by Cross Helically Wound Steel Wires

Thermal, metallurgical and mechanical analysis of circumferentially multi-pass welded P92 steel pipes

Design of Thin-Walled Centrifugal Concrete-Filled Steel Tubes under Torsion

Behaviour of reinforced thermoplastic pipe under combined bending and external pressure