Abstract:Debris flows are classical two-phase flows that can be enhanced by entraining multi-grain sizes of sediments from the bed as they rush down steep slopes, in which particle segregation is related to assessing the potential hazards. However, understanding the characteristics and fluid-particle interaction mechanisms remains challenging. Here an existing depth-averaged two-phase continuum flow model is further improved by incorporating the effects of pore-fluid pressure and bed sediment conditions on erosion. To demonstrate its reliability, we compare numerical solutions with measurements of thickness, front location, and bed deformation in two sets of USGS large-scale experimental debris flows over erodible beds. The following physical understandings are obtained. First, the positive effects of pore-fluid pressure and coarse bed materials on erosion rates are numerically reproduced. Moreover, an additional mechanism for this phenomenon has been revealed. Specifically, debris flows on steep slopes are likely to fall into a high shear stress regime, under which conditions the sediment transport capacity always takes a maximum value and is independent of the sediment size. Therefore, the sediment settling velocity that is proportional to the sediment size affects the erosion rate directly. Second, we probe into the non-dimension number and energetics of the debris flows to find it necessary to incorporate water-sediment and particle-particle interactions into reproducing the debris flow processes. Third, two kinds of mechanisms for particle size coarsening in the head region of the debris flow are resolved: on the one hand, they can be incorporated and retained there if the debris flow acquires sediment from the bed in transit due to considering the hiding/exposure mechanisms and on the other hand, they can migrate to the head by preferential transport. Furthermore, a series of idealized tests were conducted to explore the factors contributing to the segregation of particles within a debris flow. The longitudinal particle segregation was reproduced by incorporating the shear-induced non-uniform vertical distributions of velocity and sediment concentrations, the visco-inertial rheology, as well as the grain-size heterogeneity into the modelling. Sensitive analysis shows that the transport of fine particles is more inhibited by the interaction of the flow, contributing to the larger transportation velocity of the coarse particle. We further observed that the water content, the slope, and the particle size would have positive effects on the longitudinal size segregation in the head region, contrasting with the negative effects of the flow viscosity. These factors affecting the segregation ratio are attributed to the changes in the ratio of the Reynolds Number of the flow between fine and coarse particle.

Numerical Investigation about Effects of Flow Sediment-Storage Variation on Capacity Modelling of Morphological Evolutions

Numerical Investigation on the Adaptation of Dam-Break Flow-Induced Bed Load Transport to the Capacity Regime over a Sloping Bed

Incompressible Sph Scour Model for Movable Bed Dam Break Flows

Numerical Investigation of Silted-Up Dam-Break Flow with Different Silted-Up Sediment Heights

Numerical Simulation of Dam-Break Flood Over Mobile and Vegetated Beds

Numerical Simulation of Dam-Break Flow and Bed Change Considering the Vegetation Effects

TEST OF EMPIRICAL SEDIMENT TRANSPORT RELATIONS AGAINST EXPERIMENTAL SWASH DATA UNDER THE NON-CAPACITY MODELING FRAMEWORK

Depth-Averaged Two-Dimensional Model of Unsteady Flow and Sediment Transport Due to Noncohesive Embankment Break/Breaching

Some Problems on Mathematical Model of Sediment Transport in Estuary

Effect of Seepage Flow on Sediment Incipient Motion Around a Free Spanning Pipeline

Numerical Model for Sediment Transport and Bed Degradation in the Yangtze River Channel Downstream of Three Gorges Reservoir

A STUDY OF SEDIMENT TRANSPORT MODELE IN ONE-DIMENSIONAL NUMERICAL CHANNEL NETWORK MODEL

Secondary Flow Effects on Deposition of Cohesive Sediment in a Meandering Reach of Yangtze River

Transport characteristics of non-cohesive sediment with different hydrological durations and sediment transport formulas

A Computationally Efficient Two-Phase Hydro-Sediment-morphdynamic Model and Its Preliminary Field Applications

The Effect of Choosing Bed-Load Transport Direction on Bed Deformation in Channel Bends Using 3-D Flow and Sediment Transport Model

Numerical simulation of non-uniform suspended sediment flowing into the Yangtze River Estuary, China based on a river network model

Shallow Sediment Transport Flow Computation Using Time-Varying Sediment Adaptation Length

Numerical Simulation of Debris-Flow Behavior Incorporating a Dynamic Method for Estimating the Entrainment

Numerical Investigation about Propagation Characteristics and Hydro-Sediment-morphodynamic Interactions of Multi-Sized Debris Flow with a Two-Phase Continuum Model