Abstract:The superaerophobic electrode assembly enables the optimization of bubble dynamics in the alkaline electrolyzer, significantly decreasing the ohmic loss during water splitting at high current densities. The resulting zero‐gap water electrolyzer delivers a current density of 3.5 A cm−2 at 2.25 V and 85 °C in 6 m KOH. Alkaline water electrolysis (AWE) is among the most developed technologies for green hydrogen generation. Despite the tremendous achievements in boosting the catalytic activity of the electrode, the operating current density of modern water electrolyzers is yet much lower than the emerging approaches such as the proton‐exchange membrane water electrolysis (PEMWE). One of the dominant hindering factors is the high overpotentials induced by the gas bubbles. Herein, the bubble dynamics via creating the superaerophobic electrode assembly is optimized. The patterned Co‐Ni phosphide/spinel oxide heterostructure shows complete wetting of water droplet with fast spreading time (≈300 ms) whereas complete underwater bubble repelling with 180° contact angle is achieved. Besides, the current collector/electrode interface is also modified by coating with aerophobic hydroxide on Ti current collector. Thus, in the zero‐gap water electrolyzer test, a current density of 3.5 A cm−2 is obtained at 2.25 V and 85 °C in 6 m KOH, which is comparable with the state‐of‐the‐art PEMWE using Pt‐group metal catalyst. No major performance degradation or materials deterioration is observed after 330 h test. This approach reveals the importance of bubble management in modern AWE, offering a promising solution toward high‐rate water electrolysis.

Flexible Endothermic or Exothermic Operation for Temperature-Oriented Alkaline Water Electrolysis

Structure design and control strategy of a new alkaline water electrolyzer based on heat exchange

Hydrogen production efficiency enhancement for alkaline water electrolyzers operating at varying temperature via an adaptive multi-mode control

Boosting alkaline water electrolysis by asymmetric temperature modulation

Experimental and modeling study on energy flow of 250 kW alkaline water electrolysis system under steady state conditions and cold start process

Mathematical Modeling and Experimental Validation for a 50 Kw Alkaline Water Electrolyzer

Investigation of the operation characteristics and optimization of an alkaline water electrolysis system at high temperature and a high current density

Optimal Operation for P2H System Based on a Power–temperature–hydrogen Coupling Model for Alkaline Water Electrolyzer Plant

Performance Analysis of Alkaline Water Electrolysis System Based on Heat Current Modeling Method

Optimizing Alkaline Water Electrolysis: A Dual-Model Approach for Enhanced Hydrogen Production Efficiency

Optimal Operation for P2H System with 100% Renewable Energy Concerning Thermal-Electric Properties

Anodized AlCoCrFeNi high-entropy alloy for alkaline water electrolysis with ultra-high performance

A Multi-Mode Self-Optimization Electrolysis Converting Strategy for Improving Efficiency of Alkaline Water Electrolyzers

Engineering of Electrodes and Operating Conditions for Pure-Water-Fed Anion Exchange Membrane Water Electrolyzers

High‐Rate Alkaline Water Electrolysis at Industrially Relevant Conditions Enabled by Superaerophobic Electrode Assembly

Integrated Solar-Driven High-Temperature Electrolysis Operating with Concentrated Irradiation

Sustained long-term efficiency in solid oxide electrolysis systems through innovative reversible electrochemical heat management

Water Electrolysis Toward Elevated Temperature: Advances, Challenges and Frontiers

Two-step coal-assisted water electrolysis for energy-saving hydrogen production at cell voltage of 1.2 V with current densities larger than 150 mA/cm<SUP>2</SUP>

Two-step coal-assisted water electrolysis for energy-saving hydrogen production at cell voltage of 1.2 V with current densities larger than 150 mA/cm2

Anion Exchange Membrane Water Electrolyzer: Electrode Design, Lab-Scaled Testing System and Performance Evaluation