Abstract:The major barriers for applying carbon dioxide (CO2) capture technology to coal-fired power plants in China and worldwide are the consequent drop in power plant energy efficiency and significantly higher cost of electricity (COE). This paper proposes a new perspective for determining the most cost-efficient CO2 capture ratio using a modeling and simulation approach that balances the per unit parasitic energy consumption for absorbent regeneration with the per unit capital cost of the CO2 capture unit of a coal-fired power plant. Using a typical 550 MW supercritical pulverized coal-fired power plant in China as the reference plant, with monoethanolamine (MEA) absorption unit for CO2 capture, a process model of the power generation unit together with the MEA CO2 capture unit was developed and detailed process simulations were conducted with the model. Then, a sensitivity analysis was then conducted to study the impact on key plant behavior indicators, including per unit energy penalty for absorbent regeneration, net power output and power generation efficiency, total capital cost of the power plant together with the MEA CO2 absorption unit, per unit capital cost of the MEA unit, COE, as well as the per unit CO2 avoidance cost (indicated by cost per tonne (t) CO2 avoided), across a CO2 capture ratio range between 20% and 99%. The results show that when CO2 capture ratio is low, while the unit energy consumption for absorbent regeneration per tCO2 avoided increases steadily with the increase of CO2 capture ratio, the cost per tCO2 avoided decreases as the MEA absorption train is scaled up given the high capital cost of each MEA train. After CO2 capture ratio reaches certain level (60% for this plant), the cost per tCO2 avoided starts to increase with CO2 capture ratio, since the unit energy consum- - ption for absorbent regeneration per tCO2 avoided has increased to so high that it supplants the scaling effect of the MEA train and becomes the dominant factor that determines the increase or decrease trend of the cost per tCO2 avoided. Besides, due to the physical restraint on the upper bound of CO2 capture capability of one single MEA train by the diameter of the absorber, an additional MEA train is needed when the CO2 capture ratio increases to certain points (40% and 85% for this plant), resulting in jumps of several parameters including the total capital cost for the power plant and MEA CO2 capture unit, per unit capital cost for the MEA CO2 capture unit, and last the cost per tCO2 avoided. Based on all these result, finally a cost-optimal CO2 capture ratio of 40% (365 RMB/tCO2-_avoided) was obtained, which is easier for the power plant to bear while realizing a significant reduction in CO2 emission of this plant. Therefore, applying this approach for determining CO2 capture ratios could help minimize the barrier for the initiation of carbon dioxide capture and storage (CCS) in China's power industry. Besides, future replacement or improvement for the MEA CO2 capture technology has the potential to further reduce the cost per tCO2 avoided, which needs special attention.

Comprehensive Analysis of Carbon Emission Reduction Technologies (crts) in China's Coal-Fired Power Sector: A Bottom-Up Approach

Closing the Gap Between Carbon Neutrality Targets and Action: Technology Solutions for China’s Key Energy-Intensive Sectors

Estimating the Environmental Efficiency and Marginal CO2 Abatement Cost of Coal-Fired Power Plants in China

The economics of clean coal power generation with carbon capture and storage technology in China

Integrated optimization of power sector CO2 mitigation in China

Quantitative analysis of carbon dioxide emission reduction pathways: Towards carbon neutrality in China's power sector

Technology-side carbon abatement cost curves for China’s power generation sector

Techno-economic Evaluation of CO2 Capture and Storage Retrofit in Decarbonizing Different Thermal Power Plants: A Case Study in China

Integrated Optimization of CO2 Emission Mitigation in China Power Sector

Technology Options for Reducing CO2 in China's Electricity Sector in 2010–2030: from the Perspective of Internal and Social Costs

Techno-economic evaluation of CO 2 capture and storage retrofit in decarbonizing different thermal power plants: A case study in China

Reducing initial barriers for CCS deployment on pulverized coal-fired power plants in China by optimizing the capture ratio of carbon dioxide

Cost and potential for CO2 emissions reduction in China’s petroleum refining sector—A bottom up analysis

CO2 Capture Cost Reduction Potential of the Coal-Fired Power Plants under High Penetration of Renewable Power in China

Scenario analysis on CO2 emissions reduction potential in China's electricity sector

Gas or electricity? Regional pathway selection under carbon neutrality target: A case study of industrial boilers

Emission reduction path for coal-based enterprises via carbon capture, geological utilization, and storage: China energy group

The Prospects of Carbon Capture and Storage in China’s Power Sector under the 2 °C Target: A Component-based Learning Curve Approach

Retrofitted CCS technologies enhance economy, security, and equity in achieving carbon zero in power sector

Design and Operational Considerations for Selective Catalytic Reduction Technologies at Coal-Fired Boilers

High-resolution analysis of life-cycle carbon emissions from China’s coal-fired power industry: A provincial perspective