Coupled Thermostructural Sensitivity Analysis for FGMs Structures with Temperature-Dependent Properties
Biaosong Chen,Yuanxian Gu
2005-01-01
Abstract:In this paper, a numerical method of sensitivity analysis, including the finite element analysis of nonlinear heat transfer, sensitivity analysis of nonlinear heat transfer and coupled thermal-structural sensitivity analysis is presented for functionally graded materials(FGMs). The nonlinearity studied here is the temperature-dependent properties. In the analysis phase, the isoparametric graded finite elements method and direct iterative method are applied to conduct the nonlinear steady-state heat transfer. In the sensitivity analysis phase, the direct method and the adjoint method are employed to derive the sensitivity equations for nonlinear heat conduction. In the coupled thermostructrual sensitivity analysis, we develop a set of sensitivity equations for the thermoelastic problems also based on the direct method and adjoint method. In the program implementation process, the semi-analytical method is adopted to solve the sensitivity equations. The coupled effects of heat transfer on the thermal stress are investigated under a integrated solution system incorporating the heat transfer problem and structural problem. Both the material distribution parameters and structural design variables(size and structural shape design variables) are treated in the unified framework. As for the engineering problems, the estimation models: Voit-type and Wakashima-Tsukamoto are employed to predict the material properties according to the volume fraction. Numerical examples are presented to demonstrate the accuracy and the applicability of the present method. An FGM is a composite consisting of two or more phases and its composition can vary in selected spatial directions. FGMs take advantages of the combined merits of two or more kinds of materials to resist thermal and mechanical loads. Compared to the conventional materials, the functionally graded materials (FGM) show their predominant advantages of thermal and structural performance in high temperature environments in term of reducing thermal stress, removing stress singularity at a sharp bimaterial interface, improving the quality of thermal barrier and anti-fatigue. During the past two decades, much research of FGMs have been focused on the manufacture, material design and property estimation, thermal and structural analysis(1,2). One of the most important characteristics of FGMs is that they are designable. One can design the structure of FGMs both to resist the severe thermal loading due to high temperature and to maintain the structural rigidity and stiffness in a desired way by tailoring design parameters. One of the basic techniques of design optimization is sensitivity analysis. Sensitivities are valuable information for design optimization, stochastic analysis and inverse problems. They reflect the change rates (derivatives) of system responses with respect to design variables. In respect of sensitivity analysis and design optimization, the research for general thermoelastic problems has placed a solid foundation for this investigation where both the heat conduction and the structural analysis can be taken into account at the same time. Interested readers can be refereed to Refs(3-7) for general heat conduction problems and Refs(8-10) for general thermoelastic problems. Due to the benefits of the application of FGMs, attentions have been focused on the design optimization of FGMs (see Tanigawa(11), Markworth et al(12) and Noda(13)). Tanaka and his coworkers(14) fulfilled a series of work on design optimization of volume fractions of FGMs by using the incremental finite element analysis and the direct sensitivity method. Cho and Ha(15) performed the design optimization of 2D volume fraction of FGMs. They conducted the sensitivity analysis by using the global finite difference method (FDM) and then employed the interior penalty function method to solve the optimal model. Huang et al(16) studied design optimization through employing the strength and the energy storage capability of the FGMs structure as two objectives. Trueltaub(17) discussed the optimal control and optimization of FGMs in which the objective function can reflect the control problem or the optimization problem or both by tailoring its parameters. In his study, the sensitivity analysis was performed based on the continuum model and optimal criterion method was employed. In the former researches(18-19), we systematically investigated the design optimization of FGMs with linear problems using sensitivity analysis techniques. In this paper, we further investigate the nonlinear sensitivity analysis problems for the FGMs with temperature dependent properties. In the analysis phase, the isoparametric graded finite elements method and direct iterative method are applied to conduct the nonlinear steady-state heat transfer. The characteristics of the isoparametric graded finite elements are that it can be compatible with the problem of spatial varying material properties for FGMs structures and that it are readily to be implemented in the current finite element software. In the sensitivity analysis phase, the direct method and the adjoint method are employed to derive the sensitivity equations for nonlinear heat conduction. Detailed formulations of sensitivity analysis and solution methods for the nonlinear sensitivity equations are discussed. In the thermally coupled sensitivity analysis, we provide a set of sensitivity equations for the thermoelastic problems also based on the direct method and adjoint method. The coupled effects of heat transfer on the thermal stress are investigated under a integrated solution system incorporating the heat transfer problem and structural problem. Both the material distribution parameters and structural design variables(size and structural shape design variables) are treated in the unified framework. The employment of macroscale materials properties estimation methods of Voigt type and Wakashima-Tsukamoto type proposed for the FGMs problem are presented to show the applicability of the above numerical methods in practice. Numerical examples show that the methods can provide good numerical results in precision, and they also possess the good compatibility to model the problem of spatial varying material properties of FGMs by using the graded finite element method. Coupled thermostructural sensitivity analysis