Abstract:The combination of the dipping effect and hydromechanical (H-M) coupling effect can easily lead to water inrush disasters in water-rich roadways with different dip angles in coal mines. Therefore, H-M coupling tests of bedded sandstones under identical osmotic pressure and various confining pressures were conducted. Then, the evolution curves of stress-strain, permeability and damage, macro- and mesoscopic failure characteristics were obtained. Subsequently, the mechanical behaviour was characterized, and finally the failure mechanism was revealed. The results showed that: (1) The failure of the sandstone with the bedding angle of 45° or 60° was the structure-dominant type, while that with the bedding angle of 0°, 30° or 90° was the force-dominant type. (2) When the bedding angle was in the range of (0°, 30°) or (45°, 90°), the confining pressure played a dominant role in influencing the peak strength. However, within β ∈(30°, 45°), the bedding effect played a dominant role in the peak strength. (3) With the increase in bedding angle, the cohesion increased first, then decreased and finally increased, while the internal friction angle was the opposite. (4) When the bedding angle was 0° or 30°, the "water wedging" effect and the "bedding buckling" effect would lead to the forking or converging shear failure. When the bedding angle was 45° or 60°, the sliding friction effect would lead to the shear slipping failure. When the bedding angle was 90°, the combination of the "bedding buckling" effect and shear effect would lead to the mixed tension-shear failure. The above conclusions obtained are helpful for the prevention of water inrush disasters in water-rich roadways with different dips in coal mines.

Pre- and Post-Failure Behaviour of a Dike after Rapid Drawdown of River Level Based on Material Point Method

Experimental Study on Sand Dike Breaching by Wave Overtopping

Evaluation of a Dike Damaged by Pile Driving in Soft Clay

Failure Mechanism and Stabilization of a Basalt Rock Slide with Weak Layers

An experimental investigation on slope stability under drawdown conditions using transparent soils

Deep-Seated Slope Failures Induced by Inappropriate Cutting in China

Degradation of Typical Reverse Sand-Mudstone Interbedded Bank Slope Based on Multi-Source Field Experiments

Simplified Stability Analysis of Strain-Softening Slopes under Drawdown Conditions

Mechanical behaviours of bedded sandstone under hydromechanical coupling

Natural dam failure in slope failure mode triggered by seepage

Progressive Failure Behavior of Cohesive Soil Slopes under Water Drawdown Conditions

Mechanical interpretation of retrogressive failure in mild dip rock slopes induced by slope cutting and rainfall: a case study in Yunnan, China

Performance of a large-scale slope model subjected to rising and lowering water levels

Experimental study on the stability of dike reinforced by steel sheet pile under storm surge

MODEL TEST STUDY OF SLOPE INSTABILITY INDUCED BY RAPID DRAWDOWN OF WATER LEVEL

Three‐dimensional hydromechanical modeling of internal erosion in dike‐on‐foundation

An FDM–DEM coupling method for analyzing the mechanical behavior of a slope reinforced by piles

Infiltration behaviour of dike covers made of dredged material on the Rostock Research dike

Retrogressive failure pattern and retrogression distance in sensitive clays induced by river erosion

Centrifuge model test on failure of soil slope under drawdown of water level

Pile Reinforcement Behavior and Mechanism in a Soil Slope under Drawdown Conditions