Abstract:In this work, a kind of Gd/Cr codoped Bi3TiNbO9 Aurivillius phase ceramic with the formula of Bi2.8Gd0.2TiNbO9 + 0.2 wt% Cr2O3 (abbreviated as BGTN−0.2Cr) was prepared by a conventional solid-state reaction route. Microstructures and electrical conduction behaviors of the ceramic were investigated. XRD and SEM detection found that the BGTN−0.2Cr ceramic was crystallized in a pure Bi3TiNbO9 phase and composed of plate-like grains. A uniform element distribution involving Bi, Gd, Ti, Nb, Cr, and O was identified in the ceramic by EDS. Because of the frequency dependence of the conductivity between 300 and 650 °C, the electrical conduction mechanisms of the BGTN−0.2Cr ceramic were attributed to the jump of the charge carriers. Based on the correlated barrier hopping (CBH) model, the maximum barrier height WM, dc conduction activation energy Ec, and hopping conduction activation energy Ep were calculated with values of 0.63 eV, 1.09 eV, and 0.73 eV, respectively. Impedance spectrum analysis revealed that the contribution of grains to the conductance increased with rise in temperature; at high temperatures, the conductance behavior of grains deviated from the Debye relaxation model more than that of grain boundaries. Calculation of electrical modulus further suggested that the degree of interaction between charge carriers β tended to grow larger with rising temperature. In view of the approximate relaxation activation energy (~1 eV) calculated from Z′′ and M′′ peaks, the dielectric relaxation process of the BGTN−0.2Cr ceramic was suggested to be dominated by the thermally activated motion of oxygen vacancies as defect charge carriers. Finally, a high piezoelectricity of d33 = 18 pC/N as well as a high resistivity of ρdc = 1.52 × 105 Ω cm at 600 °C provided the BGTN−0.2Cr ceramic with promising applications in the piezoelectric sensors with operating temperature above 600 °C.

Investigations of Thermal Conductivity in Nano-Crystalline Gd2Ti2O7 Pyrochlore

Grain boundary and defects assisted thermal conductivity of nano-crystalline Gd2Ti2O7 Pyrochlore

Structure and Thermal Conductivity of Gd2(TixZr1−x)2O7 Ceramics

Structural Evolution and Thermal Conductivities of (gd1−xybx)2zr2o7 (x=0, 0.02, 0.04, 0.06, 0.08, 0.1) Ceramics for Thermal Barrier Coatings

Studies on Synthesis and Thermal Conductivity of (Gd0.4Sm0.5Yb0.1)2Zr2O7 Ceramic

Thermal Conductivity of the New Candidate Materials for Thermal Barrier Coatings

High-entropy titanate pyrochlore as newly low-thermal conductivity ceramics

Mechanical and thermal properties of simultaneously substituted pyrochlore compounds (Ca 2 Nb 2 O 7 ) x (Gd 2 Zr 2 O 7 ) 1−x

Ab Initio Calculation of Mechanical and Thermodynamic Properties of Gd2Zr2O7 Pyrochlore

Thermal Conductivity of (sm1–xlax)2zr2o7 (x=0, 0.25, 0.5, 0.75 and 1) Oxides for Advanced Thermal Barrier Coatings

Microstructures and Electrical Conduction Behaviors of Gd/Cr Codoped Bi3TiNbO9 Aurivillius Phase Ceramic

The Ordering Degree and Thermal Conductivity in the Pyrochlore-Type Composition Systems with a Constant Cation Radius Ratio

Thermal-physical Performances of Novel Pyrochlore-Type Ca3Ln3Ce7Ta2O26.5 (ln = Nd and Dy) Oxides

Effects of Doping Yb3+, La3+, Ti4+ , Hf4+, Ce4+ Cations on the Mechanical Properties, Thermal Conductivity, and Electronic Structures of Gd2Zr2O7

Effect of Gd and Yb co-doping on structure and electrical conductivity of the Sm2Zr2O7 pyrochlore

Synthesis and characterization of dense Gd2Ti2O7 pyrochlore thin films deposited using RF magnetron sputtering

Synthesis, Mechanical Properties And Thermal Conductivity Of Gdtao4

High temperature thermo-physical properties of and preparation of a novel thermal barrier coating Gd2Zr2O7-8YSE

The Dependence of Lattice Thermal Conductivity on Phonon Modes in Pyrochlore‐related Ln2Sn2O7 (ln = La, Gd)

Influence of B Site Substituent Ti on the Structure and Thermophysical Properties of A2B2O7-type Pyrochlore Gd2Zr2O7

Thermo-physical and mechanical properties of Yb2O3 and Sc2O3 co-doped Gd2Zr2O7 ceramics