High-Performance Foam-Shaped Strain Sensor Based on Carbon Nanotubes and Ti 3 C 2 T x MXene for the Monitoring of Human Activities
Hongchen Wang,Ruicong Zhou,Donghai Li,Linrong Zhang,Guozhang Ren,Li Wang,Jinhua Liu,Deyang Wang,Zhenhua Tang,Gang Lu,Gengzhi Sun,Hai-Dong Yu,Wei Huang
DOI: https://doi.org/10.1021/acsnano.1c00259
IF: 17.1
2021-06-04
ACS Nano
Abstract:The flexible strain sensor is of significant importance in wearable electronics, since it can help monitor the physical signals from the human body. Among various strain sensors, the foam-shaped ones have received widespread attention owing to their light weight and gas permeability. However, the working range of these sensors is still not large enough, and the sensitivity needs to be further improved. In this work, we develop a high-performance foam-shaped strain sensor composed of Ti<sub>3</sub>C<sub>2</sub>T<sub><i>x</i></sub> MXene, multiwalled carbon nanotubes (MWCNTs), and thermoplastic polyurethane (TPU). MXene sheets are adsorbed on the surface of a composite foam of MWCNTs and TPU (referred to as TPU/MWCNTs foam), which is prefabricated by using a salt-templating method. The obtained TPU/ foam works effectively as a lightweight, easily processable, and sensitive strain sensor. The TPU/ device can deliver a wide working strain range of ∼100% and an outstanding sensitivity as high as 363 simultaneously, superior to the state-of-the-art foam-shaped strain sensors. Moreover, the composite foam shows an excellent gas permeability and suitable elastic modulus close to those of skin, indicating its being highly comfortable as a wearable sensor. Owing to these advantages, the sensor works effectively in detecting both subtle and large human movements, such as joint motion, finger motion, and vocal cord vibration. In addition, the sensor can be used for gesture recognition, demonstrating its perspective in human—machine interaction. Because of the high sensitivity, wide working range, gas permeability, and suitable modulus, our foam-shaped composite strain sensor may have great potential in the field of flexible and wearable electronics in the near future.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.1c00259?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.1c00259</a>.Additional data and figures including SEM images, syntheses and characterizations of MXene, a demonstration of good adhesion between foam and MXene by attaching onto and peeling off from an adhesive tape, maximum tensile stresses/strains and their standard deviations, stress–strain curves, a repeatability test, relative resistance changes, a pore size distribution, and a finite element simulation analysis (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.1c00259/suppl_file/nn1c00259_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology