Abstract:Silicon is considered one of the most promising anode materials owing to its high theoretical energy density, however, the volume expansion/contraction during electrochemical lithiation/delithiation cycles leads to instability of the solid electrolyte interphase (SEI), which ultimately results in capacity degradation. Herein, the local stress and deformation evolution status of an SEI layer on an anode particle are investigated through a quantitative electrochemical-mechanical model. The impacts of structural uniformity, mechanical strength, and operating conditions on the stability of the SEI layer are investigated in detail. The simulation results demonstrate that when the silicon particle radius decreases from 800 nm to 600 and 400 nm, the failure time increases to 129% and 165%, respectively, of the original failure time; When the structural defect depth ratio is reduced from 0.6 to 0.4 and 0.2, the failure time increases to 174% and 237%, respectively; For the discharge rate, the failure time is extended to 134% and 239% at 0.2 C and 0.3 C, respectively, compared with that at 0.1 C. This work provides insight into the rational design of stable SEI layers and sheds light on possible methods for constructing silicon-based lithium-ion batteries with longer cycling lives.

The Solid Electrolyte Interphase on Silicon Electrodes Boosts the Stability of Lithium-Ion Batteries