Abstract:The independent optical dual-single-sideband (dual-SSB) signal generation and detection can be achieved by an optical in-phase/quadrature (I/Q) modulator and one single photodiode (PD). The dual-SSB signal is able to carry two different information. After PD detection, the optical dual-SSB signal can be converted into an electrical millimeter-wave (mm-wave) signal. Therefore, the optical dual-SSB signal generation and detection technique can be employed in the radio-over-fiber (RoF) system to achieve higher system spectral efficiency and reduce system architecture complexity. However, the I/Q modulator's nonideal property results in the amplitude imbalance of the optical dual-SSB signal, and then the crosstalk can occur. Moreover, after PD detection, the generated mm-wave signal based on the optical dual-SSB modulation has a relatively low signal-to-noise ratio (SNR), which restricts the system performance. In this paper, we propose an optical asymmetrical dual-SSB signal generation and detection scheme based on the probabilistic shaping (PS) technology, to decrease the influence of the optical dual-SSB signal's amplitude imbalance and to enhance the system performance in the scenario of the limited SNR. The dual-SSB in our scheme is composed of the left sideband (LSB) in probabilistic-shaping geometric-shaping 4-ary quadrature amplitude modulation (PS-GS4QAM) format and the right sideband (RSB) in quadrature phase-shift keying (QPSK) format. The transmitter digital signal processing (DSP) generates a dual-SSB signal to drive the optical I/Q modulator. The I/Q modulator implements an electrical-to-optical conversion and generates an optical dual-SSB signal. After PD detection, the optical dual-SSB signal is converted into a PS-16QAM mm-wave signal. In our simulation, compared with the normal 16QAM scenario, the PS-16QAM scenario exhibits a ∼1.2 dB receiver sensitivity improvement at the hard-decision forward error correction (HD-FEC) threshold of 3.8×10-3. Therefore, in our experiment, based on the PS technology, we design a dual-SSB signal including a 5 Gbaud LSB-PS-GS4QAM at -15 GHz and a 5 Gbaud RSB-QPSK at 20 GHz. After 5 km standard single-mode fiber (SSMF) transmission and PD detection, the dual-SSB signal is converted into a 5 Gbaud PS-16QAM mm-wave signal at 35 GHz. Then, the generated PS-16QAM signal is sent into a 1.2 m single-input-single-output (SISO) wireless link. In the DSP at the receiver end, the dual-SSB signal can be recovered from the mm-wave signal, and the PS-GS4QAM and QPSK data carried by the dual-SSB signal can be separated. The bit error rates (BERs) of the LSB-PS-GS4QAM and the RSB-QPSK in our experiment can be below the HD-FEC threshold of 3.8×10-3. The results demonstrate that our scheme can tolerate the I/Q modulator's nonideal property and performs well in the scenario of a relatively low SNR.

End-to-end intelligent user-specific constellation optimization in PS-32-QAM-based flexible coherent PON with enhanced sensitivity and dynamic range

End-to-end Deep Learning for a Flexible Coherent PON with User-Specific Constellation Optimization

Hybrid, Multi-Format, Flexible-Rate Coherent PON Supporting Ultimate-Simplified Coherent and Full-coherent Receivers with Compatible OLT in Downstream

First Demonstration of PS-QAM based Flexible Coherent PON in Burst-Mode with 300G Peak-Rate and Record Dynamic-Range and Net-Rate Product up to 7,104 dB.Gbps

466.4-Gbit/s PCS-64QAM Wireless Transmission Enhanced by Dual-Polarized SISO Link and Vector-Quantized Variational Autoencoders

Long-Reach PON Based on SSB Modulated Frequency-Shifted QAM and Low-Cost Direct-Detection Receiver with Kramers–Kronig Scheme

Experimental Demonstration of Bidirectional Up to 40 Gbit/s QPSK Coherent Free-Space Optical Communication Link over ∼1 Km

Principle and Strategy of Using Probabilistic Shaping in a Flexible Coherent Passive Optical Network Without Optical Amplifiers.

912-Gbits/s/channel PDM-PS-256QAM NANF Transmission Using IQ-Crosstalk Robust MIMO Equalizer Integrated with Decision-Directed CPE

Demonstration of PS-QAM Based Flexible Coherent PON in Burst-Mode With 300G Peak Rate and Ultra-Wide Dynamic Range

912-Gbits/s/channel PDM-PS-256QAM NANF Transmission Using IQ-Crosstalk Robust MIMO Equalizer Integrated with Decision-Directed CPE.

Demonstration of Pilot-Aided Continuous Downstream Digital Signal Processing for Multi-Format Flexible Coherent TDM-PON

Fast-Convergence Digital Signal Processing for Coherent PON Using Digital SCM

Pilot-Aided Continuous Digital Signal Processing for Multi-format Flexible Coherent TDM-PON in Downstream.

Adaptive feedback-driven probabilistic shaping for high-order modulation formats in a fiber-THz seamless integration system at 320 GHz

Hybrid transmission of PS-GS4QAM and QPSK data in the form of a PS-16QAM mm-wave signal enabled by optical asymmetrical dual-SSB modulation

Optimized Hybrid Probabilistic and Geometric Constellation Shaping for Coherent Optical Communication Systems Using End‐to‐End Learning

Receiver Sensitivity Improvement with Joint Geometric and Probabilistic Shaping for 200G Flexible Coherent Passive Optical Network

Terabit Bandwidth-Adaptive Transmission Using Low-Complexity Format-Transparent Digital Signal Processing

Multi-Twin-Ssb Modulation With Direct Detection Based On Kramers-Kronig Scheme For Long-Reach Pon Downstream

Real -Time Demonstration of a Low-complexity PS Scheme for 130Gb/s WDM-OFDM-PON