Abstract:The propagation of earthquake energy occurs primarily through elastic waves. If the seismic force input to a structure can be directly reduced from the source, then the structure can be protected from seismic wave energy. Seismic metamaterials, regarded as periodic structures with properties different from conventional materials, use wave propagation characteristics and bandgaps to dissipate seismic wave energy. When the seismic wave is located in the bandgap, the transmission of seismic wave energy is effectively reduced, which protects the structure from the damage caused by seismic disturbance. In practical application, locating seismic frequencies below ten Hz is a challenge for seismic metamaterials. In the commonly used method, high-mass materials are employed to induce the effect of local resonance, which is not economically feasible. In this study, a lightweight design using auxetic geometry is proposed to facilitate the practical feasibility of seismic metamaterials. The benefits of this design are proven by comparing conventional seismic metamaterials with metamaterials of auxetic geometry. Different geometric parameters are defined using auxetic geometry to determine the structure with the best bandgap performance. Finite element simulations are conducted to evaluate the vibration reduction benefits of auxetic seismic metamaterials in time and frequency domains. Additionally, the relationship between the mass and stiffness of the unit structure is derived from the analytical solution of one-dimensional periodic structures, and modal analysis results of auxetic metamaterials are verified. This study provides seismic metamaterials that are lightweight, small in volume, and possess low-frequency bandgaps for practical applications.

Low-Frequency Band Gap Seismic Metamaterials for Lamb Wave Based on Vibration-Sensitive Scatterers

Band-Gap Properties of Elastic Metamaterials with Inerter-Based Dynamic Vibration Absorbers

An Inertant Elastic Metamaterial Plate with Extra Wide Low-Frequency Flexural Band Gaps

Seismic metamaterials: Generating low-frequency bandgaps induced by inertial amplification

Attenuation Analysis of Low-Frequency Surface Waves in the Ultra-Low-frequency Bandgap of Embedded Seismic Metamaterials

Low-frequency and wide bandgap seismic metamaterials for Rayleigh wave attenuation

Based on auxetic foam: A novel type of seismic metamaterial for Lamb waves

Metamaterials of Auxetic Geometry for Seismic Energy Absorption

Inertially amplified seismic metamaterial with an ultra-low-frequency bandgap

Metamaterials for Simultaneous Acoustic and Elastic Bandgaps

A Special Eigenmode to Induce Bandgap and Attenuate Low-Frequency Seismic Surface Waves

A Ternary Seismic Metamaterial for Low Frequency Vibration Attenuation.

Plate-type Elastic Metamaterials for Low-Frequency Broadband Elastic Wave Attenuation.

A snowman-like seismic metamaterial

Rayleigh Wave Metasurface with the Emerging Hybrid Band Characteristics of Auxetic Metamaterials

Forming Low-Frequency Complete Vibration Bandgaps in a thin Nonmetallic Elastic Metamaterial Plate

Developing three-dimensional mechanical metamaterials with tailorable bandgaps for impact mitigation

A novel zero-frequency seismic metamaterial

Design of Elastic Metamaterials with Ultra-Wide Low-Frequency Stopbands Via Quantitative Local Resonance Analysis

Suppression of low-frequency ultrasound broadband vibration using star-shaped single-phase metamaterials

Low-Frequency Bandgaps of the Lightweight Single-Phase Acoustic Metamaterials with Locally Resonant Archimedean Spirals