Abstract:Ice formation on concrete surfaces significantly challenges productivity, economic growth, and safety in diverse industrial sectors. Superhydrophobic coatings represent an effective solution to delay ice formation, although their functionality deteriorates under repeated freeze–thaw cycles. To address this issue, carbon nanotubes (CNTs) are frequently employed due to their exceptional photothermal conversion and mechanical properties, which contribute to extending the sustainability of the superhydrophobic coatings. However, the chemical inertness of CNTs often necessitates complex reactions to modify their functionalization. In this study, we have invented a simple method involving the sequential growth of silica on the surface of CNTs and the hydrophobic modification of the silica surface to enhance CNT functionality. These CNTs/SiO2 functionalized nanoparticles were then incorporated into an epoxy resin using a simple spray technique, resulting in a superhydrophobic and photothermal coating on concrete. To fine-tune the coating's properties, we explored the effects of varying the doping levels of the nanoparticles on the surface morphology, roughness, and wettability of the CNT/SiO2-EP coatings. The optimal level of hydrophobicity was achieved by doping the coatings with 300 mg of functionalized nanoparticles, yielding an impressive contact angle of 159.6°. The integration of functionalized nanoparticles into the epoxy matrix not only enhances hydrophobicity but also improves mechanical robustness and abrasion resistance by creating multiscale surface roughness. Additionally, the coating exhibits outstanding chemical stability even under extreme conditions. One of the most significant advantages of these coatings is their ability to extend the ice nucleation time significantly. This effect is primarily attributed to the superior superhydrophobicity of the nanoparticles and the remarkable photothermal conversion capability of the CNTs. Upon exposure to Xenon lamp radiation, the ice droplets rapidly melt, underscoring the impressive performance of these coatings in preventing ice formation.

Superhydrophobic surface of hybrid nanocomposites made of TiO 2 and multi-walled carbon nanotubes: Photothermal ice removal performance and wear resistance

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Fabrication of Modifier-Free Superhydrophobic Surfaces with Anti-Icing and Self-Cleaning Properties on Ti Substrate by Anodization Method

Percolation-dominated Superhydrophobicity and Conductivity for Nanocomposite Coatings from the Mixtures of a Commercial Aqueous Silica Sol and Functionalized Carbon Nanotubes

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

A Sustainable Superhydrophobic and Photothermal Coatings for Anti-Icing Application on Concrete with a Simple Method for CNTs/SiO2 Modification

A photothermal superhydrophobic coating with un-fluorinated modified CNTs for anti-icing applications on concrete

Strong mechanical and durable superhydrophobic photothermal MWCNTs/SiO2/PDMS/PVDF composite coating for anti-icing and de-icing

A Composite Superhydrophobic, Photothermal Coating by Modified Carbon Nanotubes and the Study of its Anti‐icing/Deicing Behavior

An abrasion-resistant, photothermal, superhydrophobic anti-icing coating prepared by polysiloxane-modified carbon nanotubes and fluorine-silicone resin

Robust TiN-based photothermal superhydrophobic coating with sandwich structure for effective anti−/de-icing applications

Superhydrophobic and Photothermal PVDF/CNTs Durable Composite Coatings for Passive Anti‐Icing/Active De‐Icing

Creation of Superhydrophobic Coatings Based on MWCNTs Xerogel

Superhydrophobic and photothermal SiC/TiN durable composite coatings for passive anti-icing/active de-icing and de-frosting

Superhydrophobic coating with electro-photo-thermal conversion properties for all-weather anti-icing

CNTs-induced superhydrophobic and photothermal coating with long-term durability and self-replenishing property for anti-icing/de-icing

One-pot synthesis of superhydrophobic photothermal materials with self-healing for efficient ice removal

A multifunctional superhydrophobic phase‐change photothermal coating for concrete anti‐icing

Anti-icing and deicing characteristics of photothermal superhydrophobic surfaces based on metal nanoparticles and carbon nanotube materials

Superhydrophobic Composite Coating with Excellent Mechanical Durability

A Multi-layer Flexible Photothermal Titanium Nitride based Superhydrophobic Surface for Highly Efficient Anti-icing and De-icing