Extrusion of MOF-Polymer Nanocomposites with High MOF Loadings

Joshua A Powell,Jazmine Aiya D Marquez,Giles A Johnson,Ray O K Ozdemir,Qingsheng Wang

DOI: https://doi.org/10.26434/chemrxiv-2024-vxxkw

2024-04-01

Abstract:While metal-organic frameworks (MOFs) hold great promise for a wide range of industrial applications, the challenges of handling fine crystalline powders have limited their adoption. MOF-polymer composites are one solution to this challenge, as composites or membranes are substantially easier to handle, however most existing MOF-polymer composites have low MOF loadings and suffer MOF leaching due to the weak interactions between the MOF and the polymer. In this work, we report the continuous extrusion of MOF-polymer composites containing up to 60 wt% of commercially available MOFs and successful extrusion of small amounts composites containing 70 wt% MOF, with the composite viscosity an important factor in the success of the extrusion. The MOF is well-distributed through the composite and remains crystalline despite the high temperatures and mechanical forces involved in the extrusion process. While the composites are more brittle than the base polymer and appear largely non-porous, the suspected presence of inaccessible internal pores coupled with the increased thermal stability of the composites compared to the base polymer indicate potential for the composites to be used as fire resistant materials.

Chemistry

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly focus on how to efficiently prepare polymer composites containing a high proportion of metal - organic frameworks (MOFs), and overcome the problems of low MOF loading and easy leakage in existing methods. Specifically:

1. **Increasing the loading amount of MOFs in composites**: Traditional MOF - polymer composites usually contain a relatively low proportion of MOFs, which limits their performance in practical applications. Through the continuous extrusion process, this research has successfully prepared composites containing up to 60 wt% commercial MOFs, and has also prepared a small amount of composites containing 70 wt% MOFs.

2. **Improving the interaction between MOFs and polymers**: Due to the weak interaction between MOFs and polymers, existing composites are prone to MOF leakage. By selecting appropriate polymers and optimizing extrusion conditions, this research enables MOFs to be evenly distributed in the composites and maintain a crystalline state, without decomposing or leaking even under the action of high temperature and mechanical force.

3. **Increasing the thermal stability of composites**: It has been found that composites containing a high proportion of MOFs have higher thermal stability than pure polymers, indicating that these composites may have the potential as flame - retardant materials.

4. **Solving the processing difficulties under high MOF loading**: Composites with a high MOF loading are prone to problems such as high viscosity and pressure accumulation during the processing. By selecting low - viscosity polymers (such as polystyrene) and optimizing extrusion conditions, this research has successfully solved these problems and achieved continuous extrusion.

In summary, the main objective of this paper is to prepare composites with a high MOF loading through the continuous extrusion process and solve the technical problems in the processing, thereby providing more efficient and stable MOF - polymer composites for industrial applications.