Abstract:The division-of-amplitude full Stokes simultaneous polarization imaging system has prominent merits, such as real time, high spatial resolution, high precision, etc. The development of the division-of-amplitude full Stokes simultaneous polarization imaging system has a high application value. The division-of-amplitude full Stokes simultaneous polarization imaging system uses polarization beam splitters, a half wave plate (HWP) and a quarter wave plate (QWP) to modulate the incident Stokes vector into four intensity images. Using the four intensity images, the incident Stokes vector can be analyzed. In the system, the phase delay errors of the HWP and the QWP have a direct influence on the measurement accuracy of the incident Stokes vector. A Stokes vector measurement error equation containing the phase delay errors of the HWP and the QWP is established. When there are the phase delay errors of the HWP and the QWP in the system, the Stokes vector measurement errors of the unpolarized light, 0° liner polarized light, 90° liner polarized light, 45° liner polarized light, 135° liner polarized light, right circularly polarized light and left circularly polarized light are analyzed. A method of solving the Stokes vector measurement error of incident light with any polarization state is given. When the Stokes vectors with different degrees of polarization (DOPs) are used as the incident light, the simulation results show that both the Stokes vector measurement error and the DOP measurement error increase with the DOP of incident light increasing. Therefore, we select the polarization measurement accuracy to evaluate the system when the DOP of incident light equals 1. To ensure that the polarization measurement accuracy of the system is within 2%, the phase delay error of the HWP should be within ±1.6° and the phase delay error of the QWP should be within ±0.5°. The analysis results of the phase delay errors of the HWP and the QWP are of great significance for improving the polarization measurement accuracy of the division-of-amplitude full Stokes simultaneous polarization imaging system, and also provide important theoretical guidance in designing and developing the system.

White-box Digital-Twin-based Real-Time Polarization Tracking

A White‐Box Digital Twin for Real‐Time Polarization Tracking

Alignment Technique for Polarization-Based Optical-Systems

Simple and Fast Polarization Tracking algorithm for Continuous-Variable Quantum Key Distribution System Using Orthogonal Pilot Tone

High-speed polarization tracking using thin film lithium niobate integrated dynamic polarization controller.

Real-time Polarization Imaging Algorithm for Camera-Based Polarization Navigation Sensors.

Robust Adaptive Heading Tracking Fusion for Polarization Compass With Uncertain Dynamics and External Disturbances

Polarization Tracking for Stokes-vector Modulation Formats Using Kalman Filter

Real-Time Polarization Spectral Detection Based on a Dual-Dispersion and Coded-Aperture Imaging System.

A Novel Control Scheme for Four‐plate Retardation Polarization Controller

Fast Polarization State Tracking for Dual-Polarization Direct Detection with Jones-space Field Recovery.

Full-Stokes Retrieving and Configuration Optimization in a Time-Integration Imaging Polarimeter

Real-time Underwater Polarization Imaging Without Relying on Background

Performance Improvement on Polarization State and Phase Tracking Based on Pilot-Aided Adaptive Kalman Filter

Single-shot 3D Tracking Based on Polarization Multiplexed Fourier-phase Camera

An Optimal Polarization Tracking Algorithm for Lithium-Niobate-based Polarization Controllers

Phase Delay Error Analysis of Wave Plate of Division-of-amplitude Full Stokes Simultaneous Polarization Imaging System

Polarization-state Tracking Based on Kalman Filter in Continuous-Variable Quantum Key Distribution.

A Polarization Information Aided Probabilistic Data Association for Target Tracking in Polarimetric Radar System

An Improved Local Integration Algorithm For Polarization Gradient Fields.