Abstract:To improve printing fidelity, reducing the slice thickness to eliminate the staircase effect is of great importance for digital light processing (DLP) technology. However, using a thinner slice printing model leads to a longer total printing time in the conventional DLP approach, which significantly reduces printing efficiency. In this work, a tunable pre-curing DLP approach was developed where the relationship between the forming layer thickness and ultraviolet (UV) exposure time is theoretically analyzed, and the curing process of photo-curable solutions is divided into two sub-processes: pre-curing and further curing. In the pre-curing process, the photo-curable solution is initially pre-cured and kept at the pre-gelled state due to continuous UV exposure during subsequent DLP printing. Then, the pre-cured photo-curable solution is quickly cured to form a designed thickness in each printing cycle. Also, the UV absorbing agent is added to the photo-curable hydrogel solutions to regulate the pre-curing process. Using a 10 μm slice for DLP printing, the total printing time of the tunable pre-curing DLP is approximately 5.6% of the conventional DLP, and the staircase effect on the surface is significantly eliminated using 10 μm slice tunable pre-curing DLP approach, which leads to a better printing fidelity. Thus, both printing fidelity and efficiency are significantly and simultaneously improved by the tunable pre-curing DLP approach. Moreover, the reduction of UV exposure time and slice thickness is beneficial for cell viability during DLP bioprinting of thick bulk structures, which is demonstrated by the printing of PC12 cell-laden gelatin methacrylate (GelMA) bioinks. Using the tunable pre-curing DLP approach, the PC12 cells achieved higher cell viability (90.2 ± 6.1%) and better cell morphology than the conventional DLP approach (54.5 ± 4.8%). The tunable pre-curing DLP approach provides a promising alternative to extend the application of DLP printing greatly.

Research on the large-format splicing method for stamping-type digital light processing 3D printing

Dynamics of Liquid Transfer from Nanoporous Stamps in High-Resolution Flexographic Printing

Multi-step exposure method for improving structure flatness in digital light processing-based printing

Large-scale 3D Printing Technology Based on the Visual Stitching Method

A Scalable Digital Light Processing 3D Printing Method

High-fidelity and high-efficiency additive manufacturing using tunable pre-curing digital light processing

Development of a Multi-Step Exposure Method for Projection-Based Printing System

Scalable Printing of Bionic Multiscale Channel Networks Through Digital Light Processing-Based Three-Dimensional Printing Process.

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Modeling the Printability of Photocuring and Strength Adjustable Hydrogel Bioink During Projection-Based 3D Bioprinting.

Fused Deposition Modeling Five-Axis Additive Manufacturing: Machine Design, Fundamental Printing Methods and Critical Process Characteristics

An Approach to Improve the Resolution of DLP 3D Printing by Parallel Mechanism

Projection-Based Continuous 3D Printing Process with the Grayscale Display Method

Axisymmetric thermo-mechanical analysis of laser-driven non-contact transfer printing

Three-Dimensional Printing of Large Objects with High Resolution by Dynamic Projection Scanning Lithography

Thermo-mechanical Modeling of Laser-Driven Non-Contact Transfer Printing: Two-Dimensional Analysis

Laser-driven Programmable Non-Contact Transfer Printing of Objects Onto Arbitrary Receivers Via an Active Elastomeric Microstructured Stamp

Quantitative Characterization of Liquid Photosensitive Bioink Properties for Continuous Digital Light Processing Based Printing

An Accurate Thermomechanical Model for Laser-Driven Microtransfer Printing

Recent Innovations in Interfacial Strategies for DLP 3D Printing Process Optimization

Minimizing Polymer Curl Distortion and Heat Impact to Improve Digital Light Processing Printing Accuracy via Subdivision Method