SLM Printed Millimeter-Wave Multibeam Antenna Array Based on Filtering Butler Matrix

Jianxing Li,Sifan Wu,Yuanxi Cao,Xiaoming Chen,Yujian Li,Xiu Yin Zhang

DOI: https://doi.org/10.1109/tap.2024.3372774

IF: 5.7

2024-01-01

IEEE Transactions on Antennas and Propagation

Abstract:In this communication, a 3-D-printed filtering Butler matrix-based $1\times4$ multibeam antenna array is investigated in the Ka-band. The Butler matrix consists of all-resonator 180 degrees filtering hybrids, 90 degrees couplers, and phase shifters, providing incremental phase gradients along with a bandpass characteristic. Four wideband horns are employed as the radiator array. The proposed design eliminates the requirement of crossovers and connectors between the Butler matrix and radiators, resulting in a much compact structure. The 1X4 multibeam filtering antenna array prototype is monolithically fabricated using selective laser melting (SLM) 3-D printing technology. The prototype achieves an impedance bandwidth (return loss > 10 dB) of 28.1-29.8 GHz, a gain of up to 16.2 dBi, and stable radiation beams at 0(degrees), +/- 23(degrees), and +/- 46(degrees). Meanwhile, beyond the operating bandwidth, the realized gain experiences a suppression of more than 30 dB. The proposed filtering Butler matrix-fed multibeam array, characterized by its high efficiency, large power capacity, and excellent frequency selectivity performance, demonstrates potential applications in millimeter-wave (mm-Wave) communication systems.