Abstract:The performance characteristics of cusped field thruster are strongly associated with the anode process. In order to enhance the working gas ionization rate and diffuse anode centralized heat, a magnetic conductive hollow anode was designed. Three different anode positions were studied, where the anode surface was -8, 0 and 8 mm to the first magnet surface. The magnetic field was simulated by FEMM and the performance was tested in a vacuum system. By providing and analyzing experimental data of anode current and oscillation, thrust, anode efficiency and specific impulse, certain patterns can be found that how does the ionization rate is influenced by different anode positions. Possible explanations for increased ionization rate are given. More magnetic cusps would enhance electrons’ drifting time, and a centralized electron distribution at anode surface would increase the collision probability between electrons and neutral gas. Nomenclature CFT = Cusped Field Thruster AP = Anode position ISP = Specific impulse MFS = Magnetic Field Strength MC = Magnetic Cusp HA = Hollow Anode FR = Flow Rate I......Introduction ultistage cusped field thruster is an emerging hall effect thruster recently. Have been developed by German’s HEMPT1, MIT’s DCFT2, Stanford University’s CCFT3 and many other institutes, this thruster concept mainly consists of four parts, which are magnet stages, cathode, discharging ceramic channel and anode with gas inlet. The magnet stages are located around the ceramic discharge channel, which are put in opposite poles for adjacent ones. These magnets can generate cusped magnetic field as shown in Figure.1. Electrons are released from cathode and moving towards anode direction powered by the electric field force. During the movement, electrons follow and do 1 Student, Department of Energy Science and Engineering, Harbin Institute of Technology, machengyu19930408@gmail.com 2 Lecturer, Department of Energy Science and Engineering, Harbin Institute of Technology, thruster@126.com 3 Professor, Department of Energy Science and Engineering, Harbin Institute of Technology, thruster@126.com 4 Student, Department of Energy Science and Engineering, Harbin Institute of Technology, 1437140573@qq.com 5 Student, Department of Energy Science and Engineering, Harbin Institute of Technology, 1151786040@qq.com 6 Student, Department of Energy Science and Engineering, Harbin Institute of Technology, 1634466984@qq.com M

A Global Model for Evaluating Discharge Characteristics and Performance of Hollow Cathodes

A coupled plasma‐thermal model for hollow cathode power decomposition and parametric analysis

Modeling on plasma energy balance and transfer in a hollow cathode

2-D Modeling Of Orificed Hollow Cathodes Of Stationary Plasma Thrusters Spt-100

Hollow cathode modeling: II. Physical analysis and parametric study

Diagnostic and Modelling Investigation on the Ion Acceleration and Plasma Throttling Effects in a Dualemitter Hollow Cathode Micro-Thruster

Hollow cathode effect modified time-dependent global model and high-power impulse magnetron sputtering discharge and transport in cylindrical cathode

Impact of Exterior Electron Emission on the Self-Sustaining Margin of Hollow Cathode Discharge

Hollow cathode modeling: I. A coupled plasma thermal two-dimensional model

Effects of Propellant Species on the Discharge Characteristics of Glow Discharge Hollow Cathode

2-D Extended Fluid Model Of Applied-Field Magnetoplasmadynamic Thruster With Solid And Hollow Cathodes

Simulation of discharge process of Hall thruster under the internal and external cathode conditions

Design of Magnetically Enhanced Hollow Cathode Micro-Thruster: Concept and Experimental Research

Optimization of a Long-Lifetime Hall Thruster with an Internally Mounted Cathode

On Cathode Position and Inclination Angle in Magnetically Shielded Hall Thrusters

Effect of the Hollow Cathode Heat Power on the Performance of an Hall-Effect Thruster

Influence of Heating on the Discharge Characteristics of a Hollow Cathode

Numerical simulation study on discharge characteristics of the dual hollow cathode plasma source using magnetic mirror field

Investigation of the Physical Process Inside the Crater During the Ablation of the Cathode Material of a Micro-Cathode Arc Thruster

Kinetic investigation of discharge performance for Xe, Kr, and Ar in a miniature ion thruster using a fast converging PIC-MCC-DSMC model

Experimental Study of HollowAnode Position Effect on Multistage Cusped Field Thruster IEPC-2015-407 / ISTS-2015-b-407