Abstract:Photoelectrochemical (PEC) water splitting serves as one of the promising approaches for producing clean and renewable energy, and their solar–hydrogen energy conversion efficiency depends on the interfacial charge separation and carrier mobility. Herein, we report an effective strategy to promote the PEC performance by fabricating a WO3 photoanode rich in oxygen vacancies (Ov) modified by NiFe-based layered double hydroxide (LDH). When WO3–Ov/NiFe-LDH is used as a photoanode, the maximum photocurrent density at 1.8 V versus RHE has been significantly enhanced to 2.58 mA·cm–2, which is 4.3 times higher than that of WO3. In addition, analogues were studied in controlled experiments without Ov, which further demonstrated that the synergistic effect of NiFe-LDH and Ov resulted in increased carrier concentration and driving force. According to electrical impedance spectroscopy, X-ray photoelectron spectroscopy, and Mott–Schottky analysis, the built-in electronic field in WO3 homojunction, along with the accelerated hole capture by the NiFe-LDH cocatalyst contributes to the improved charge separation and transport in the WO3–Ov/NiFe-LDH electrode. This work proposes an efficient and valuable strategy for designing the structure of WO3-based photoelectrodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.langmuir.1c00638?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.langmuir.1c00638</a>.O 1s XPS spectrum of WO3; UV–vis spectra and Tauc plots of WO3, WO3–Ov, and WO3–Ov/NiFe-LDH photoanodes; PL spectra and Mott–Schottky plots of WO3, WO3–Ov, and WO3–Ov/NiFe-LDH photoanodes; and comparison of typical WO3-based photoanodes for PEC water splitting (<a class="ext-link" href="/doi/suppl/10.1021/acs.langmuir.1c00638/suppl_file/la1c00638_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Regulation of Electron Delocalization Between Flower-Like (co, Ni)-MOF Array and WO3/W Photoanode for Effective Photoelectrochemical Water Splitting

MoS 2 modified NiFe LDH hierarchical structure as efficient photoanode towards photoelectrochemical water splitting

Amorphous Metal-Organic Frameworks Loaded on BiVO4 Photoanodes with Unique Internal Metal-Like Structure for Promoting Photoelectrochemical Water Splitting

Multifunctional WO 3 /NiCo 2 O 4 heterojunction with extensively exposed bimetallic Ni/Co redox reaction sites for efficient photoelectrochemical water splitting

Decoration of Co-MOF on α-Fe 2 O 3 for boosting photoelectrochemical water oxidation in alkaline and neutral electrolyte

Integrating transition metal phosphide catalysts on WO3 photoanodes enabling robust photoelectrocatalytic water oxidation

Co-Ni-Mo phosphides hierarchical nanoarrays as bifunctional electrocatalysts for excellent overall water splitting

Three-dimensional Flower-Like Ni-S/Co-MOF Grown on Ni Foam As a Bifunctional Electrocatalyst for Efficient Overall Water Splitting.

Biomimetic (co, Ni, W)OxNy/WO3 X N Y /WO3 Photoelectrocatalyst for Robust Seawater Oxidation

Oxygen Vacancy-Enhanced Photoelectrochemical Water Splitting of WO 3 /NiFe-Layered Double Hydroxide Photoanodes

Oxygen Vacancy-Enhanced Photoelectrochemical Water Splitting of WO3/NiFe-Layered Double Hydroxide Photoanodes.

In Situ Growth of Fe2WO6 on WO3 Nanosheets to Fabricate Heterojunction Arrays for Boosting Solar Water Splitting.

Branched Wo3 Nanosheet Array with Layered C3n4 Heterojunctions and Coox Nanoparticles As A Flexible Photoanode for Efficient Photoelectrochemical Water Oxidation

Efficient Photoelectrochemical Water Splitting and Impedance Analysis of WO3−x Nanoflake Electrodes

Engineering Single-Atomic Ni-N4-O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

High‐Efficiency Photo‐Assisted Large Current‐Density Water Splitting with Mott‐Schottky Heterojunctions

A N-Si/coox/ni:Coooh Photoanode Producing 600 Mv Photovoltage for Efficient Photoelectrochemical Water Splitting

2D Porous Co-Mo Nitride Heterostructures Nanosheets for Highly Effective Electrochemical Water Splitting

Engineering Single-Atomic Ni-N 4 -O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Gradient surficial forward Ni and interior reversed Mo-doped CuWO4 films for enhanced photoelectrochemical water splitting

Macroporous Array Induced Multiscale Modulation at the Surface/Interface of Co(OH) 2 /NiMo Self‐Supporting Electrode for Effective Overall Water Splitting