Abstract:An in situ method (ISM), impregnation calcination method, and coating method were proposed to prepare catalytic polyphenylene sulfide (PPS) filter materials, and the low-temperature catalytic activities for nitrogen oxides (NOx) and Hg-0 were investigated in fixed bed system. Furthermore, the surface morphology characteristics, crystalline structure, and NOx interaction mechanisms were studied by scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared, temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy. The results showed that the maximum NOx and Hg-0 conversions decreased in the sequence of Mn-Ce-Fe-Co-O-x/PPS@ ISM> Mn-Ce-Fe-Co-O-x/PPS@ impregnation calcination method > Mn-Ce-Fe-Co-O-x/PPS@ coating method. The best catalyst reduced 84.6% NOx and oxidized 93.2% Hg-0 at 170 degrees C. NO obviously affected the conversions through a homogeneous reaction. As the reaction temperature was increased from 120 to 170 degrees C, NOx and Hg-0 conversions increased significantly but decreased from 170 to 300 degrees C. In addition, the maximum oxidation activity of NO to NO2 on Mn-Ce-Fe-Co-O-x/PPS@ ISM was 8.6% at 170 degrees C. NO-TPD and Hg-TPD respectively indicated that NOx was mainly stored by nitrite/nitrate and NO2, and HgO/Hg-2(NO3)(2) and HgSO4 were the thermal stable forms of mercury presented in PPS catalyst after reaction in simulated selective catalytic reduction flue gases. The microstructure characterizations of scanning electron microscopy-energy dispersive X-ray and Fourier transform infrared results suggested that the active metal oxides were uniformly supported on the PPS surface as the proportion of the catalyst preparation process. X-ray photoelectron spectroscopy spectra results indicated that Mn, Ce, Fe, and Co mainly existed in the form of Mn4+, Ce4+, Fe3+, and Co3+, respectively, which had the best catalytic activity to achieve flue gas NOx and mercury removal. The reaction mechanisms were further discussed on the basis of the results.

Low-temperature Catalytic Oxidation of PCDD/Fs over MnCeCoOx/PPS Catalytic Filter

Functional MCFe@PTFE Filters for the Catalytic Oxidation of PCDD/Fs at Low Temperatures

Ozone Assisted Oxidation of Gaseous PCDD/Fs over CNTs-containing Composite Catalysts at Low Temperature.

Simultaneous catalytic removal of NO and chlorobenzene over Mn–Ce-Sm-Sn-O x /P84 composite catalytic filter

Catalytic decomposition of gaseous PCDD/Fs over V2O5/TiO2-CNTs catalyst: Effect of NO and NH3 addition.

Low temperature destruction of PCDD/Fs by catalysis coupled with activated carbon

Performance and reaction mechanism for low-temperature NO<sub><i>x</i></sub> catalytic synergistic Hg<SUP>0</SUP> oxidation of catalytic polyphenylene sulfide filter materials

Fabrication of Mn-CeOx/polyphenylene sulfide functional composites by an in situ reaction for low-temperature NO reduction with NH3

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

Low Temperature Degradation of Polychlorinated Dibenzo-P-dioxins and Dibenzofurans over a VOx-CeOx/TiO2 Catalyst with Addition of Ozone.

Comparative Analyses of Catalytic Degradation of PCDD/Fs in the Laboratory Vs. Industrial Conditions

Preparation of the Mn-Ce-Co-Ox/PPS filter material by a redox method and its activity in the low-temperature selective catalytic reduction of NOx

PCDD/F adsorption and destruction in the flue gas streams of MWI and MSP via Cu and Fe catalysts supported on carbon

Fabrication of nf-MnO2/PPS Functional Composites for Selective Reduction of NOx with NH3

Comparative analyses of catalytic degradation of PCDD/Fs in the laboratory vs. industrial conditions.

Preparation of MnO2/PoPD@PPS functional composites for low-temperature NO reduction with NH3

Catalytic decomposition of PCDD/Fs from flue gas

Influence of Fe‐modified Mn–Ce–Fe–Co–Ox/P84 Catalytic Filter Materials for Low‐temperature NO Removal Synergistic Hg0oxidation

Catalytic Decomposition of PCDD/Fs over Nano-TiO2 Based V2O5/CeO2 Catalyst at Low Temperature

Research on de-NO by low-temperature SCR based on MnO x-CeO 2/PPSN

Low temperature destruction of PCDD/Fs over V 2 O 5 -CeO 2 /TiO 2 catalyst with ozone