Is Catalytic Ozonation Always an Efficient Treatment for Refractory Pollutant in Various Water Matrices?

Yang Song,Jiaming Guan,Junan Chen,Jianshan Peng,Wen Qin,Jin Jiang,Jun Ma
DOI: https://doi.org/10.1016/j.seppur.2024.126769
IF: 8.6
2024-01-01
Separation and Purification Technology
Abstract:In this study, surrogate indicators (OH yield and R-ct value) were developed to identify whether homogeneous and heterogeneous catalysts should be added during ozonation of refractory pollutants. The abatement of atrazine (ATZ) was in the order of O-3/H2O2 process (94 %) > O-3/gamma-Al2O3 process (70 %) > ozonation alone process (55 %) in synthetic water samples at pH 7, which was in agreement with the order of OH yield and R-ct value. However, the abatement of ATZ during ozonation alone process (0.64-0.62) was higher than O-3/H2O2 process (0.63-0.60) and O-3/gamma-Al2O3 process (0.48-0.49) in the presence of high dosage of humic acid (HA, 3.38 x 10(-1)-4.50 x 10(-1) mg C/L) at pH 7. The abatement of ATZ was linearly proportional to OH yield, whereas it was not linearly proportional to R-ct value in the synthetic water samples containing HA at pH7. The abatement of ATZ during ozonation alone process was higher than that during catalytic ozonation process by one-time ozone dosing method in real water. The abatement of ATZ during O-3/H2O2 process and O-3/gamma-Al2O3 process were higher than that during ozonation alone process by three-time ozone dosing method in real water, which was linearly proportional to OH yield and R-ct value. The residual DOM in phase III become recalcitrant to ozone, which could be decomposed by catalyst forming OH. Overall, this result implies that the comparison of OH yield and R-ct value between ozone decay by DOM in various water matrices and by catalyst should be concerned before the addition of catalyst during ozonation process was applied in real water.
What problem does this paper attempt to address?