Abstract:Proton-exchange-membrane water electrolysis (PEMWE) is a technology, where hydrogen is electrochemically produced from water. Efficient industrial-scale production of hydrogen via PEMWE is contingent upon developing systems that are sufficiently resilient to operate under non-ideal operating conditions. Mathematical models can provide insight into the underlying physical mechanisms and inform the development of mitigating strategies. In the current work, a cell-level non-isothermal continuum model that is based on concentrated-solution theory that accounts for multiple ionic mobile species in the membrane and ionomer, energy transport, and fluid flow through porous media, was used to investigate two challenges to PEMWE becoming a viable technology, specifically contamination and hydrogen crossover. In cationic contamination, dissolved salts in the reactant water supplant protons in the membrane and ionomer and significantly increase the applied potentials required for operation. Hydrogen crossover is a concern especially in low-current operational modes, which can arise due to PEMWE powered by variable and cyclical renewable energy sources and can result in the production of combustible gas mixtures. For cation-contaminated cells, simulation results suggest that the uptake of the contaminant cation increased as a function of current density until local conditions in the cathode catalyst layer (cCL) allowed the contaminant desorption to occur. The model suggests that the increased cell potential is primarily due to proton activity losses in the hydrogen evolution reaction within the cCL and that ionic conductivity losses are insufficient to cause the performance losses observed experimentally. Agreement with experimental data lends the model as a possible method or predictive models for PEMWE cell recovery methods. Observations of hydrogen crossover simulations suggest several aspects of hydrogen crossover, which include that localized pressures within the catalyst layers can enhance crossover, bubble-nucleation kinetics limit the exhaust of product gases, and convective fluxes due to electroomostic drag are negligible. An improved understanding of the crossover mechanisms can inform the development of low-crossover designs and mitigation strategies. Figure 1

Progresses on Two-Phase Modeling of Proton Exchange Membrane Water Electrolyzer

Modeling of Two-Phase Transport in Proton Exchange Membrane Electrolyzer Cells for Hydrogen Energy

Multi-Dimensional Performance Evaluation and Energy Analysis of Proton Exchange Membrane Water Electrolyzer

Performance Modeling and Mechanism Study of Proton Exchange Membrane Water Electrolyzer Coupled with Water Electroosmosis

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Modeling Two-Phase Transport on the PEM Water Electrolyzer

Electrochemical Performance Modeling of A Proton Exchange Membrane Electrolyzer Cell for Hydrogen Energy

Three-Dimensional Numerical Simulation of the Performance and Transport Phenomena of Oxygen Evolution Reactions in a Proton Exchange Membrane Water Electrolyzer

Modeling Water and Thermal Transients Inside Proton Exchange Membrane for Vehicle Application Fuel Cells

Simulation and experiment study on two-phase flow characteristics of proton exchange membrane electrolysis cell

Multi-parameter Analysis and Optimization Design of Proton Exchange Membrane Electrolytic Cell

Electrical circuit modeling of proton exchange membrane electrolyzer: The state-of-the-art, current challenges, and recommendations

A 3-D Multiphase Model of Proton Exchange Membrane Electrolyzer Based on Open-Source CFD

3D two-phase and non-isothermal modeling for PEM water electrolyzer: Heat and mass transfer characteristic investigation

Aspects of Reduced Performance of Proton-Exchange-Membrane Water Electrolysis Via Continuum Modeling

Two-phase analytical modeling and intelligence parameter estimation of proton exchange membrane electrolyzer for hydrogen production

Three-Dimensional CFD Simulation of a Proton Exchange Membrane Electrolysis Cell

Multiphysics modeling of proton exchange membrane water electrolysis: From steady to dynamic behavior

Modeling and numerical studies for a 3D two-phase mixed-domain model of pem fuel cell

Two-Phase Flow in Porous Electrodes of Proton Exchange Membrane Fuel Cell

PEM Fuel Cell Performance and Its Two-Phase Mass Transport