RF Energy Harvesting and Wireless Power Transfer for IoT

Onel Luis Alcaraz López,Katsuya Suto

DOI: https://doi.org/10.3390/s24237567

IF: 3.9

2024-11-29

Sensors

Abstract:The rapid proliferation of the Internet of Things (IoT) has transformed modern living by interconnecting billions of devices across industrial, commercial, and domestic sectors [...]

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

What problem does this paper attempt to address?

IEEE Access Special Section Editorial: Wirelessly Powered Networks: Algorithms, Applications, and Technologies.

Theofanis P. Raptis,Nuno Borges Carvalho,Diego Masotti,Lei Shu,Cong Wang,Yuanyuan Yang

DOI: https://doi.org/10.1109/access.2019.2895439

IF: 3.9

2019-01-01

IEEE Access

Abstract:Wireless Power Transfer (WPT) is, by definition, a process that occurs in any system where electrical energy is transmitted from a power source to a load without the connection of electrical conductors. WPT is the driving technology that will enable the next stage in the current consumer electronics revolution, including battery-less sensors, passive RF identification (RFID), passive wireless sensors, the Internet of Things and 5G, and machine-to-machine solutions. WPT-enabled devices can be powered by harvesting energy from the surroundings, including electromagnetic (EM) energy, leading to a new communication networks paradigm, the Wirelessly Powered Networks.
Practical Issues of Energy Harvesting and Data Transmissions in Sustainable IoT

Yu Luo,Lina Pu

DOI: https://doi.org/10.48550/arXiv.2001.00087

2020-01-01

Abstract:The sustainable Internet of Things (IoT) is becoming a promising solution for the green living and smart industries. In this article, we investigate the practical issues in the radio energy harvesting and data communication systems through extensive field experiments. A number of important characteristics of energy harvesting circuits and communication modules have been studied, including the non-linear energy consumption of the communication system relative to the transmission power, the wake-up time associated with the payload, and the varying system power during consecutive packet transmissions. In order to improve the efficiency of energy harvest and energy utilization, we propose a new model to accurately describe the energy harvesting process and the power consumption for sustainable IoT devices. Experiments are performed using commercial IoT devices and RF energy harvesters to verify the accuracy of the proposed model. The experiment results show that the new model matches the performance of sustainable IoT devices very well in the real scenario.

Signal Processing,Networking and Internet Architecture
Energy Harvesting Technologies and Applications for the Internet of Things and Wireless Sensor Networks

Slim Naifar,Olfa Kanoun,Carlo Trigona

DOI: https://doi.org/10.3390/s24144688

IF: 3.9

2024-07-19

Sensors

Abstract:The field of Internet of Things (IoT) technologies is advancing rapidly, driven by the critical need for autonomous and sustainable wireless sensor networks [...]

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
RF Power Transmission for Self-sustaining Miniaturized IoT Devices

Lukas Schulthess,Federico Villani,Philipp Mayer,Michele Magno

DOI: https://doi.org/10.1109/ICECS202256217.2022.9970865

2024-07-31

Abstract:Radio Frequency (RF) wireless power transfer is a promising technology that has the potential to constantly power small Internet of Things (IoT) devices, enabling even battery-less systems and reducing their maintenance requirements. However, to achieve this ambitious goal, carefully designed RF energy harvesting (EH) systems are needed to minimize the conversion losses and the conversion efficiency of the limited power. For intelligent internet of things sensors and devices, which often have non-constant power requirements, an additional power management stage with energy storage is needed to temporarily provide a higher power output than the power being harvested. This paper proposes an RF wireless power energy conversion system for miniaturized IoT composed of an impedance matching network, a rectifier, and power management with energy storage. The proposed sub-system has been experimentally validated and achieved an overall power conversion efficiency (PCE) of over 30 % for an input power of -10 dBm and a peak efficiency of 57 % at 3 dBm.

Systems and Control,Signal Processing
Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges

Osmel Martínez Rosabal,Onel L. Alcaraz López,Hirley Alves,Matti Latva-aho

2023-11-09

Abstract:Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions.

Networking and Internet Architecture,Signal Processing
Energy Harvesting Using a Low-Cost Rectenna for Internet of Things (IoT) Applications

Kinza Shafique,Bilal A. Khawaja,Muhammad Daniyal Khurram,Syed Maaz Sibtain,Yazir Siddiqui,Muhammad Mustaqim,Hassan Tariq Chattha,Xiaodong Yang

DOI: https://doi.org/10.1109/access.2018.2834392

IF: 3.9

2018-01-01

IEEE Access

Abstract:Traditionally employed human-to-human and human-to-machine communication has recently been replaced by a new trend known as the Internet of things (IoT). IoT enables device-to-device communication without any human intervention, hence, offers many challenges. In this paradigm, machine’s self-sustainability due to limited energy capabilities presents a great challenge. Therefore, this paper proposed a low-cost energy harvesting device using rectenna to mitigate the problem in the areas where battery constraint issues arise. So, an energy harvester is designed, optimized, fabricated, and characterized for energy harvesting and IoT applications which simply recycles radio-frequency (RF) energy at 2.4 GHz, from nearby Wi-Fi/WLAN devices and converts them to useful dc power. The physical model comprises of antenna, filters, rectifier, and so on. A rectangular patch antenna is designed and optimized to resonate at 2.4 GHz using the well-known transmission-line model while the band-pass and low-pass filters are designed using lumped components. Schottky diode (HSMS-2820) is used for rectification. The circuit is designed and fabricated using the low-cost FR4 substrate ( ${h}$ = 16 mm and $\varepsilon _{r} = 4.6$ ) having the fabricated dimensions of 285 mm $\times \,\,90$ mm. Universal software radio peripheral and GNU Radio are employed to measure the received RF power, while similar measurements are carried out using R&S spectrum analyzer for validation. The received measured power is −64.4 dBm at the output port of the rectenna circuit. Hence, our design enables a pervasive deployment of self-operable next-generation IoT devices.

computer science, information systems,telecommunications,engineering, electrical & electronic
Software Defined Networking for Energy Harvesting Internet of Things.

Xumin Huang,Rong Yu,Jiawen Kang,Zhuoquan Xia,Yan Zhang

DOI: https://doi.org/10.1109/JIOT.2018.2799936

IF: 10.6

2018-01-01

IEEE Internet of Things Journal

Abstract:Internet of Things (IoT) provides ubiquitous intelligence and pervasive interconnections to diverse physical objects. The overall network performance of existing IoT is restricted by limited network lifetime. Hence, energy harvesting technology with energy replenishment from mobile charger is proposed to prolong the network lifetime. Energy harvesting IoT is emerged. Nodes can not only request ene...
RF Energy Harvesting Techniques for Battery-Less Wireless Sensing, Industry 4.0, and Internet of Things: A Review

Gholamhosein Moloudian,Mohammadamin Hosseinifard,Sanjeev Kumar,Roy B. V. B. Simorangkir,John L. Buckley,Chaoyun Song,Gualtiero Fantoni,Brendan O’Flynn

DOI: https://doi.org/10.1109/jsen.2024.3352402

IF: 4.3

2024-03-02

IEEE Sensors Journal

Abstract:As the Internet of Things (IoT) continues to expand, the demand for the use of energy-efficient circuits and battery-less devices has grown rapidly. Battery-less operation, zero maintenance, and sustainability are the desired features of IoT devices in fifth-generation (5G) networks and green Industry 4.0 wireless systems. The integration of energy harvesting systems, IoT devices, and 5G networks has the potential impact to digitalize and revolutionize various industries such as Industry 4.0, agriculture, food, and healthcare, by enabling real-time data collection and analysis, mitigating maintenance costs, and improving efficiency. Energy harvesting plays a crucial role in envisioning a low-carbon net zero future and holds significant political importance. This survey aims at providing a comprehensive review on various energy harvesting techniques including radio frequency (RF), multisource hybrid, and energy harvesting using additive manufacturing technologies. However, special emphasis is given to RF-based energy harvesting methodologies tailored for battery-free wireless sensing, and powering autonomous low-power electronic circuits and IoT devices. The key design challenges and applications of energy harvesting techniques, as well as the future perspective of system on chip (SoC) implementation, data digitization in Industry 4.0, next-generation IoT devices, and 5G communications are discussed.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Advances in Energy Harvesters/Nanogenerators and Self-Powered Sensors II

Jianxiong Zhu,Qiongfeng Shi

DOI: https://doi.org/10.3390/nano14010121

IF: 5.3

2024-01-04

Nanomaterials

Abstract:The Internet of Things (IoT) has become a focal point in the realm of information technology and has facilitated the interconnectedness and communication of various objects, such as devices and sensors in smart cities, intelligent transportation, industrial automation, agriculture, healthcare, etc [...]

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
IEEE ACCESS Special Section Editorial: Energy Efficient Wireless Communications with Energy Harvesting and Wireless Power Transfer

Jie Xu,Bruno Clerckx,Zhiguo Ding,Xin Wang,Yong Zeng

DOI: https://doi.org/10.1109/access.2018.2882657

IF: 3.9

2018-01-01

IEEE Access

Abstract:With technological advancements, future wireless communications networks are expected to incorporate densely deployed base stations serving tens of billions of low-power wireless devices, in order to enable emerging Internet-of-Things (IoT) applications. However, this leads to a dramatic increase in energy cost at the wireless network, and makes it a difficult task to efficiently power massive wireless devices. Therefore, how to reduce the energy cost at the network side and also provide sustainable energy supply at the wireless device side become two increasingly important issues for the success of IoT. Recently, energy harvesting (EH) from ambient sources (e.g., solar and wind) and dedicated wireless power transfer (WPT) via radio frequency (RF) signals have emerged as appealing solutions to power base stations and low-power wireless devices. Such techniques have several promising advantages over the traditional grid/battery-powered systems, such as improved energy efficiency, reduced energy and maintenance costs, prolonged lifetime, and even perpetual and uninterrupted operations. Hence, EH wireless communications and wireless powered communications have attracted signifficant interests recently from both academia and industry.
Information Harvesting for Far-Field Wireless Power Transfer

Mehmet C. Ilter,Risto Wichman,Mikko Säily,Jyri Hämäläinen

DOI: https://doi.org/10.48550/arXiv.2105.12838

2021-05-27

Abstract:Considering ubiquitous connectivity and advanced information processing capability, huge amount of low-power IoT devices are deployed nowadays and the maintenance of those devices which includes firmware/software updates and recharging the units has become a bottleneck for IoT systems. For addressing limited battery constraints, wireless power transfer is a promising approach such that it does not require any physical link between energy harvester and power transfer. Furthermore, combining wireless power transfer with information transmission has become more appealing. In the systems that apply radio signals the wireless power transfer has become a popular trend to harvest RF-radiated energy from received information signal in IoT devices. For those systems, design frameworks mainly deal with the trade-off between information capacity and energy harvesting efficiency. Therein various signaling design frameworks have been proposed for different system preferences between power and information. In addition to this, protecting the information part from potential eavesdropping activity in a service area introduces security considerations for those systems. In this paper, we propose a novel concept, Information Harvesting, for wireless power transfer systems. It introduces a novel protocol design from opposite perspective compared to the existing studies. Particularly, Information Harvesting aims to transmit information through existing wireless power transfer mechanism without interfering/interrupting power transfer.

Information Theory,Signal Processing
Energy Harvesting towards Self-Powered IoT Devices

Hassan Elahi,Khushboo Munir,Marco Eugeni,Sofiane Atek,Paolo Gaudenzi

DOI: https://doi.org/10.3390/en13215528

IF: 3.2

2020-10-22

Energies

Abstract:The internet of things (IoT) manages a large infrastructure of web-enabled smart devices, small devices that use embedded systems, such as processors, sensors, and communication hardware to collect, send, and elaborate on data acquired from their environment. Thus, from a practical point of view, such devices are composed of power-efficient storage, scalable, and lightweight nodes needing power and batteries to operate. From the above reason, it appears clear that energy harvesting plays an important role in increasing the efficiency and lifetime of IoT devices. Moreover, from acquiring energy by the surrounding operational environment, energy harvesting is important to make the IoT device network more sustainable from the environmental point of view. Different state-of-the-art energy harvesters based on mechanical, aeroelastic, wind, solar, radiofrequency, and pyroelectric mechanisms are discussed in this review article. To reduce the power consumption of the batteries, a vital role is played by power management integrated circuits (PMICs), which help to enhance the system’s life span. Moreover, PMICs from different manufacturers that provide power management to IoT devices have been discussed in this paper. Furthermore, the energy harvesting networks can expose themselves to prominent security issues putting the secrecy of the system to risk. These possible attacks are also discussed in this review article.

energy & fuels
Radiofrequency Energy Harvesting Systems for Internet of Things Applications: A Comprehensive Overview of Design Issues

Alex Mouapi

DOI: https://doi.org/10.3390/s22218088

2022-10-22

Abstract:Radiofrequency energy harvesting (RF-EH) solutions have evolved significantly in recent years due to the ubiquity of electromagnetic waves in any environment. This review presents a comprehensive report on autonomous wireless sensor (WS) design considerations based on RF-EH. The obtainability of RF-EH-WS is driven by development efforts in the areas of RF-EH circuit design, known as rectifying antenna (Rectenna), the minimization of the energy budget of WS (MEB-WS), and finally, power management modules (PMM). The PMM aims to optimize the energy efficiency of the WS. In addition to these three factors, examining the RF power levels harvested related to the rectenna feeding technique (RFT) is essential. Since we did not find any review presenting a holistic view of these design considerations, we strived to provide a detailed picture of recent advances and new enhancements in this review. To address this issue, this review gives an overview of the seminal and contemporary studies in the RF-EH-WS field. The IoT issues are also discussed in terms of their basic requirement to support reduced size or miniaturized smart objects, which are common matters in current applications of WS nodes. Potential open issues that might be considered for future research are also discussed in this article. For a more detailed description of all presented concepts, many significant references are provided for the readers.
Remotely UHF-Powered Ultra Wideband RFID for Ubiquitous Wireless Identification and Sensing

Majid Baghaei,Zhuo Zou,David S.,Li-Rong Zheng

DOI: https://doi.org/10.5772/6520

2009-01-01

Abstract:A new term of ubiquitous computing and communication is booming up which will transform our future corporate, community and personal life [1]. Early form of ubiquitous information and communication was happened in the use of mobile phones and nowadays it has become a vital part of everyday life for many million of people even more than internet. Recently, many research and developments are ongoing to bring this phenomenon more into everyday life by embedding smart systems into more objects which can interact to each other and people through a wireless link. It will provide connectivity for anything from anywhere, anyplace and for anyone. These connections create a network between items which lead to Internet of Things (IoT). Several kinds of information can be exchanged through the network such as environment status, and location which make a huge field of novel applications and market. To realize the IoT several technical innovation in different number of fields are essential. In order to have an embedded module in almost everything, first a simple and low cost system is vital. Second, embedding sensor technology into the items allows the system to detect changes in the physical status of things, which allows the system to changes or modifies some parameters of the system. And finally, system miniaturization allows smaller things have the ability of connection. A combination of all of these developments will create the IoT which connect the world’s objects intelligently. Different challenges need to be addressed. Energy issues such as low-power chipset design, energy harvesting, efficient and compact energy storage are some of the key issues. Many research need to be done in this area. Embedding sensor for data collection is another enabler for development of IoT. Low-power processing power and memory are important to process and store the sensor data. Different integration such antenna and passive integration need to be studied. Efficient communication protocol, modulation scheme and transmission speed is required to be studied. New methods for power management at different levels of the network are needed. Itegration of a smart device into the package or into the product is demanded. Different solutions such as system-on-chip and system-on-package should be investigated. Manufacturing challenges must be solved and the implementation cost must be lowered. Radio frequency Identification (RFID) technology is a promising solution for IoT realization. It has been used mostly in supply chain management and logistic for several years [2].
Smart Home IoT System by Using RF Energy Harvesting

Nermeen A. Eltresy,Osama M. Dardeer,Awab Al-Habal,Esraa Elhariri,Abdelrhman M. Abotaleb,Dalia N. Elsheakh,Ahmed Khattab,Shereen A. Taie,Hassan Mostafa,Hala A. Elsadek,Esmat A. Abdallah

DOI: https://doi.org/10.1155/2020/8828479

IF: 2.336

2020-12-01

Journal of Sensors

Abstract:IoT system becomes a hot topic nowadays for smart home. IoT helps devices to communicate together without human intervention inside home, so it is offering many challenges. A new smart home IoT platform powered using electromagnetic energy harvesting is proposed in this paper. It contains a high gain transmitted antenna array and efficient circularly polarized array rectenna system to harvest enough power from any direction to increase lifetime of the batteries used in the IoT system. Optimized energy consumption, the software with adopting the Zigbee protocol of the sensor node, and a low-power microcontroller are used to operate in lower power modes. The proposed system has an 84.6-day lifetime which is approximately 10 times the lifetime for a similar system. On the other hand, the proposed power management circuit is operated at 0.3 V DC to boost the voltage to ~3.7 V from radio frequency energy harvesting and manage battery level to increase the battery lifetime. A predictive indoor environment monitoring system is designed based on a novel hybrid system to provide a nonstatic plan, approve energy consumption, and avoid failure of sensor nodes in a smart home.

engineering, electrical & electronic,instruments & instrumentation
Special Issue: Advance in Energy Harvesters/Nanogenerators and Self-Powered Sensors

Qiongfeng Shi,Jianxiong Zhu

DOI: https://doi.org/10.3390/nano12183167

2022-09-13

Abstract:Internet of things (IoT) technologies are greatly promoted by the rapidly developed 5G-and-beyond networks, which have spawned diversified applications in the new era including smart homes, digital health, sports training, robotics, human-machine interaction, metaverse, smart manufacturing and industry 4 [...].
Index Modulation-based Information Harvesting for Far-Field RF Power Transfer

M. Ertug Pihtili,Mehmet C. Ilter,Ertugrul Basar,Risto Wichman,Jyri Hämäläinen

2023-09-25

Abstract:While wireless information transmission (WIT) is evolving into its sixth generation (6G), maintaining terminal operations that rely on limited battery capacities has become one of the most paramount challenges for Internet-of-Things (IoT) platforms. In this respect, there exists a growing interest in energy harvesting technology from ambient resources, and wireless power transfer (WPT) can be the key solution towards enabling battery-less infrastructures referred to as zero-power communication technology. Indeed, eclectic integration approaches between WPT and WIT mechanisms are becoming a vital necessity to limit the need for replacing batteries. Beyond the conventional separation between data and power components of the emitted waveforms, as in simultaneous wireless information and power transfer (SWIPT) mechanisms, a novel protocol referred to as information harvesting (IH) has recently emerged. IH leverages existing WPT mechanisms for data communication by incorporating index modulation (IM) techniques on top of the existing far-field power transfer mechanism. In this paper, a unified framework for the IM-based IH mechanisms has been presented where the feasibility of various IM techniques are evaluated based on different performance metrics. The presented results demonstrate the substantial potential to enable data communication within existing far-field WPT systems, particularly in the context of next-generation IoT wireless networks.

Signal Processing
Simultaneous Information and Energy Flow for IoT Relay Systems with Crowd Harvesting

Weisi Guo,Sheng Zhou,Yunfei Chen,Siyi Wang,Xiaoli Chu,Zhisheng Niu

DOI: https://doi.org/10.1109/mcom.2016.1500649cm

IF: 9.03

2016-01-01

IEEE Communications Magazine

Abstract:It is expected that the number of wireless devices will grow rapidly over the next few years due to the growing proliferation of the Internet of Things. In order to improve the energy efficiency of information transfer between small devices, we review state-of-the-art research in simultaneous wireless energy and information transfer, especially for relay-based IoT systems. In particular, we analyze simultaneous information and energy transfer from the source node, and the design of time-switching and power-splitting operation modes, as well as the associated optimization algorithms. We also investigate the potential of crowd energy harvesting from transmission nodes that belong to multiple radio networks. The combination of source and crowd energy harvesting can greatly reduce the use of battery power and increase the availability and reliability for relaying. We provide insight into the fundamental limits of crowd energy harvesting reliability based on a case study using real city data. Furthermore, we examine the optimization of transmissions in crowd harvesting, especially with the use of node collaboration while guaranteeing quality of service.
Printed Electronics in Radiofrequency Energy Harvesters and Wireless Power Transfer Rectennas for IoT Applications

Kacper Skarżyński,Marcin Słoma

DOI: https://doi.org/10.1002/aelm.202300238

IF: 6.2

2023-07-03

Advanced Electronic Materials

Abstract:The reduction of volume, weight, and cost of electronics fuels the development of Internet of Things (IoT) devices. Using wireless energy sources and adapting printed electronics instead of batteries and traditional printed circuit boards can accelerate this growth further. This review outlines recent advancements in the fabrication of energy harvesting and wireless power transfer rectennas using printed electronics techniques. The Internet of Things is currently one of the fastest‐growing branches in electronics. The development of energy storage systems and the miniaturization of dedicated printed circuit boards significantly influence that growth. However, the need for batteries and traditional printed circuit boards still limits devices' minimum size, weight, and cost, narrowing the application area. Energy harvesters and wireless power transfer systems fabricated with printed electronics can significantly reduce such devices' weight, size, and cost. Printed electronics technology provides scalable tools for many electronics applications, shortening the validation time and enabling new low‐cost or disposable solutions on lightweight and flexible substrates embedded inside 3D printed structures and directly on device housings. Energy harvesting and wireless power transfer systems in electronic devices can provide enough power to minimize battery capacity and size or even eliminate the need for batteries in low‐power applications. This review presents an adaptation of printed electronics technology in the fabrication of radio frequency energy harvesters and wireless power transfer rectennas for IoT applications. Last, perspectives for development towards greater integration with microsystems, transient electronics with ecofriendly materials, adaptation for next‐generation telecommunication systems, and 3D structural electronics solutions are briefly discussed.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Advancements and Challenges in Antenna Design and Rectifying Circuits for Radio Frequency Energy Harvesting

Martins Odiamenhi,Haleh Jahanbakhsh Basherlou,Chan Hwang See,Naser Ojaroudi Parchin,Keng Goh,Hongnian Yu

DOI: https://doi.org/10.3390/s24216804

IF: 3.9

2024-10-24

Sensors

Abstract:The proliferation of smart devices increases the demand for energy-efficient, battery-free technologies essential for sustaining IoT devices in Industry 4.0 and 5G networks, which require zero maintenance and sustainable operation. Integrating radio frequency (RF) energy harvesting with IoT and 5G technologies enables real-time data acquisition, reduces maintenance costs, and enhances productivity, supporting a carbon-free future. This survey reviews the challenges and advancements in RF energy harvesting, focusing on far-field wireless power transfer and powering low-energy devices. It examines miniaturization, circular polarization, fabrication challenges, and efficiency using the metamaterial-inspired antenna, concentrating on improving diode nonlinearity design. This study analyzes key components such as rectifiers, impedance matching networks, and antennas, and evaluates their applications in biomedical and IoT devices. The review concludes with future directions to increase bandwidth, improve power conversion efficiency, and optimize RF energy harvesting system designs.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

RF Energy Harvesting and Wireless Power Transfer for IoT

IEEE Access Special Section Editorial: Wirelessly Powered Networks: Algorithms, Applications, and Technologies.

Practical Issues of Energy Harvesting and Data Transmissions in Sustainable IoT

Energy Harvesting Technologies and Applications for the Internet of Things and Wireless Sensor Networks

RF Power Transmission for Self-sustaining Miniaturized IoT Devices

Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges

Energy Harvesting Using a Low-Cost Rectenna for Internet of Things (IoT) Applications

Software Defined Networking for Energy Harvesting Internet of Things.

RF Energy Harvesting Techniques for Battery-Less Wireless Sensing, Industry 4.0, and Internet of Things: A Review

Advances in Energy Harvesters/Nanogenerators and Self-Powered Sensors II

IEEE ACCESS Special Section Editorial: Energy Efficient Wireless Communications with Energy Harvesting and Wireless Power Transfer

Information Harvesting for Far-Field Wireless Power Transfer

Energy Harvesting towards Self-Powered IoT Devices

Radiofrequency Energy Harvesting Systems for Internet of Things Applications: A Comprehensive Overview of Design Issues

Remotely UHF-Powered Ultra Wideband RFID for Ubiquitous Wireless Identification and Sensing

Smart Home IoT System by Using RF Energy Harvesting

Special Issue: Advance in Energy Harvesters/Nanogenerators and Self-Powered Sensors

Index Modulation-based Information Harvesting for Far-Field RF Power Transfer

Simultaneous Information and Energy Flow for IoT Relay Systems with Crowd Harvesting

Printed Electronics in Radiofrequency Energy Harvesters and Wireless Power Transfer Rectennas for IoT Applications

Advancements and Challenges in Antenna Design and Rectifying Circuits for Radio Frequency Energy Harvesting