Abstract:Ferroelectric/polymer based dielectric nanocomposites deliver high power density, but low discharged energy density (Ue) and charge–discharge efficiency (η), which are resulted from high remnant electrical displacement (Dr) of ferroelectric fillers and large dielectric difference between ferroelectrics and polymers, constrain their use in integrated electronic equipments. Here, we provide an effective and low-cost strategy for developing high-energy–density and high-efficiency dielectric nanocomposites by incorporating core–shell structured PLZST@Al2O3 nanoparticles (NPs) as fillers into P(VDF-HFP) polymer matrix. The introduction of PLZST antiferroelectric (AFE) cores with large maximum electrical displacement (Dmax) and small Dr can substantially increase Dmax-Dr values and narrow D-E loops of dielectric nanocomposites. The addition of Al2O3 shells with wide band gap and dielectric constant near that of the P(VDF-HFP) matrix can prevent the charge injection from electrodes and cause the applied electric field evenly distribute, and thus inhibit the leakage current and increase the breakdown strength (Eb), which are confirmed by finite element simulations. Consequently, benefited from large Dmax-Dr of 7.93 μC/cm2 and Eb of 5281.68 kV/cm, PLZST@Al2O3/P(VDF-HFP) nanocomposites with 3 wt% filler contents exhibit simultaneously a large Ue of 17.95 J/cm3 and high η of 75%, which outperform those of all latest NPs/polymer nanocomposites in terms of overall capacitive performances and are even higher than those achieved in polymer nanocomposites loaded with nanowires or nanofibers fabricated by complicated methods. This study exhibits a promising way to promote the industrialized fabrication of dielectric capacitors through capitalizing on the synergy of the dielectric constant gradient, wide band gap and AFE characteristics of the fillers.

Constructing Deep Traps to Achieve Excellent Dielectric Properties in Crystal-Based HfO2/PEI Nanocomposite Films with Ultralow Filler Loadings.

Enhancing the high-temperature energy storage properties of PEI dielectrics by constructing trap-rich covalently cross-linked networks via POSS-functionalized BNNS

Enhanced Interfacial and Dielectric Performance for Polyetherimide Nanocomposites through Tailoring Shell Polarities

Largely enhanced dielectric properties of polymer composites with HfO2 nanoparticles for high-temperature film capacitors

Modulating Electron Traps of PEI-based Nanocomposites for Superb Capacitive Performance over a Broad Temperature Range

Improved Capacitive Energy Storage at High Temperature via Constructing Physical Cross‐Link and Electron–Hole Pairs Based on P‐Type Semiconductive Polymer Filler

Sub‐Nanowires Boost Superior Capacitive Energy Storage Performance of Polymer Composites at High Temperatures

Increased Deep Trap Density in Interfacial Engineered Nanocomposite Revealed by Sequential Kelvin Probe Force Microscopy for High Dielectric Energy Storage

Novel inorganic fillers of 1D hydroxyapatite nanowires induced superior energy storage performances of P(VDF-HFP)-based composite films

Enhanced High-Temperature Performance of PEI Dielectrics Via Deep Trap Energy Levels and Physically Crosslinked Effects

Achieving Excellent Dielectric and Energy Storage Performance in Core-Double-Shell-Structured Polyetherimide Nanocomposites

Advancing high-temperature electrostatic energy storage via linker engineering of metal–organic frameworks in polymer nanocomposites

Regulation of deep and shallow hole/electron trap states and charge conducting behaviors of dielectric tribo-materials for maximizing retained charges

Enhancing High-Temperature Energy Storage Performance of PEI-Based Dielectrics by Incorporating ZIF-67 with a Narrow Bandgap

Modulating the charge trapping characteristics of PEI/BNNPs dilute nanocomposite for improved high-temperature energy storage performance

Energy density and efficiency of scalable polymer nanocomposites utilizing core-shell PLZST@Al2O3 antiferroelectric fillers with dielectric gradient

Tuning Nanofillers in In Situ Prepared Polyimide Nanocomposites for High‐Temperature Capacitive Energy Storage

Ultra-superior high-temperature energy storage properties in polymer nanocomposites via rational design of core–shell structured inorganic antiferroelectric fillers

Introducing deep trap states for high dielectric strength of aramid‐based composite films

High‐temperature energy storage performance of polyetherimide all‐organic composites enhanced by hindering charge hopping and molecular motion

High‐Entropy‐Nanofibers Enhanced Polymer Nanocomposites for High‐Performance Energy Storage