Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

A New Perspective on the Influence of the Electrolytic Bubbles on the Pressure Drop in the Vertical Pipe Flow

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Numerical Simulations Of Fluid Dynamics And Mixing In A Large Shallow Bubble Column: Effects Of The Sparging Pipe Allocations For Multiple-Pipe Gas Distributors

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Modeling of Bubbly Flow using a Combined Volume of Fluid and Discrete Bubble Model: Investigation on Interphase Forces

Modeling of Droplet Traffic in Interconnected Microfluidic Ladder Devices

Three-dimensional Numerical Simulation of Bubble Dynamics and Design Optimization of Microchannel in Proton Exchange Membrane Water Electrolyzers

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Numerical modeling and analysis of the effect of pressure on the performance of an alkaline water electrolysis system

Improving the Efficiencies of Water Splitting and CO2 Electrolysis by Anodic O2 Bubble Management.

Channel Design Optimization of Alkaline Electrolysis Stacks Considering the Trade-off Between Current Efficiency and Pressure Drop

Enhancing Efficiency in Alkaline Electrolysis Cells: Optimizing Flow Channels through Multiphase Computational Fluid Dynamics Modeling

Experimental Study on Flow Patterns and Pressure Drop of Decaying Swirling Gas-Liquid Flow in a Vertical Pipe

Numerical Simulation and Analysis of a Two-Phase Flow Model Considering Bubble Coverage for Alkaline Electrolytic Water

A comprehensive study of parameters distribution in a short PEM water electrolyzer stack utilizing a full-scale multi-physics model

Study on the gas-liquid two-phase flow patterns for hydrogen production from electrolytic water

Modeling and analysis of cross-flow solid oxide electrolysis cell with oxygen electrode/electrolyte interface oxygen pressure characteristics for hydrogen production

Numerical Simulation of Aeration Bubble Growth in A Plug-Flow Aeration Tank Used in Wastewater Treatment