Abstract:A bio‐inspired design and synthesis of ultra‐stretchable ceramic aerogels based on highly buckled nanofibers is reported to solve the formidable fiber fracture in ceramic aerogels. The resulting material features unusual combination of ultra‐large stretchability, excellent thermomechanical stability and tensile‐insensitive thermal insulating property, which addresses the critical and bottleneck problem of low structural stability induced thermal runaway in ceramic aerogels. Ceramic aerogels have exhibited many superior characteristics with promising applications. As an attractive material system for thermal insulation under extreme conditions, ceramic aerogels are required to withstand complex thermomechanical stress to retain their super‐insulating properties but, they often suffer from severe fracture damage that can lead to catastrophic failure. Herein, inspired by the tendrils of Parthenocissus, we report a design and synthesis of ultra‐stretchable ceramic aerogels constructed by highly buckled nanofibers. The buckling of nanofibers is formed by asymmetric deformation through two‐component off‐axial electrospinning method. The resulting aerogels feature an ultra‐large stretchability with a tensile strain of up to 150% and high restorability with a tensile strain of up to 80%. They also display a near‐zero Poisson's ratio (4.3 × 10−2) and a near‐zero thermal expansion coefficient (2.6 × 10−7 per °C), resulting in excellent thermomechanical stability. Benefiting from this ultra‐stretchability, the aerogels exhibit a unique tensile‐insensitive thermal insulation performance with thermal conductivities remaining only ≈106.7 mW m−1 K−1 at 1000 °C. This work promotes the development of ceramic aerogels for robust thermal insulation under extreme conditions and establishes a set of fundamental considerations in structural design of stretchable aerogels for a wide spectrum of applications.

Microstructural Evolution of a Novel TiN Ceramic Aerogel Derived from the Organic/inorganic Hybrid with Excellent Anti-Oxidation and Thermal Insulation Property

In Situ Formation of the TiCN Phase in SiBCN Ceramic Aerogels Enabling Superior Thermal and Structural Stability Up to 1800 °C.

Thermal insulation TiN aerogels prepared by a combined freeze-casting and carbothermal reduction-nitridation technique

Effect of Titanium Dioxide Particles on the Thermal Stability of Silica Aerogels

Rational design of a novel mullite aerogel with extremely high mechanical strength and anti-oxidation behavior for advanced thermal protection in extreme environments

Polar bear hair inspired ternary composite ceramic aerogel with excellent interfacial bonding and efficient infrared transmittance for thermal insulation

Low-Temperature Synthesis of Monolithic Titanium Carbide/Carbon Composite Aerogel

Carbonaceous ceramic nanofibrous aerogels for high-temperature thermal superinsulation

Anisotropic and hierarchical biphasic nanorod ceramic aerogels with thermal radiation shielded, high strength and exceptional stability for thermal superinsulation

Ultra-Light and Ultra-Low Thermal Conductivity of Elastic Silica Nanofibrous Aerogel with TiO2 Opacifier Particles as Filler

Evolution of the Novel C/SiO2/SiC Ternary Aerogel with High Specific Surface Area and Improved Oxidation Resistance

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Ceramic Meta‐Aerogel with Thermal Superinsulation up to 1700 °C Constructed by Self‐Crosslinked Nanofibrous Network via Reaction Electrospinning

Ultralight, thermal insulating, and high-temperature-resistant mullite-based nanofibrous aerogels

Investigation on textural and structural evolution of the novel crack-free equimolar Al2O3-SiO2-TiO2 ternary aerogel during thermal treatment

Direct synthesis of ultralight, elastic, high-temperature insulation N-doped TiO2 ceramic nanofibrous sponges via conjugate electrospinning

Interweaved Cellular Structured Ceramic Nanofibrous Aerogels with Superior Bendability and Compressibility

Semi-template based, biomimetic-architectured, and mechanically robust ceramic nanofibrous aerogels for thermal insulation

Preceramic polymer hybridized phenolic aerogels and the derived ZrC/SiC/C ceramic aerogels with ultrafine nanocrystallines

Tailoring Mechanical Properties of a Ceramic Nanowire Aerogel with Pyrolytic Carbon for In Situ Resilience at 1400 °C

Highly‐Buckled Nanofibrous Ceramic Aerogels with Ultra‐Large Stretchability and Tensile‐Insensitive Thermal Insulation