Abstract:Electrospun nanofiber mats have been used as sensing elements to construct piezoresistive devices due to their large surface area and high porosity. However, they have not been utilized as skin-contact supporting layers to package conductive nanofiber networks for the fabrication of piezoresistive sensors. In this work, we developed a sandwich-structured pressure sensor, which can sensitively monitor human motions and vital signs, with electrospun nanofiber mats as supporting, sensing, and packaging layers. The nanofiber mats were prepared by electrospinning with biocompatible poly (l-lactide) (PLA), silk fibroin (SF), and collagen (COL) as raw materials. The synthesized PLA–SF–COL mat possesses a non-woven structure with a fiber diameter of 122 ± 28 nm and a film thickness of 37 ± 5.3 μm. Polypyrrole (PPy) nanoparticles were grown in-situ on the mat to form a conductive layer. After stacking the pristine and conductive mats to form a PLA–SF–COL mat/(PPy-coated mat)2 structure, another layer was electrospun to pack the multilayers for the construction of a sandwich-structured piezoresistive sensor. The as-prepared device can sensitively detect external pressures caused by coin loading and finger tapping/pressing. It can also tolerate more than 600 times of pressing without affecting its sensing capability. The human body-attached experiments further demonstrate that the sensor could real-time monitor finger/arm bending, arterial pulse, respiration rate, and speaking-caused throat vibration. The electrospinning-based fabrication may be used as a facile and low-cost strategy to produce flexible piezoresistive sensors with excellent skin-compatibility and great pressure sensing capability.

Conformal Design and Fabrication of Wearable Piezoelectric Sensor Array for Spatiotemporal Distribution of Arterial Pulse Waves

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

Thin, Flexible Hybrid-Structured Piezoelectric Sensor Array with Enhanced Resolution and Sensitivity

Health Monitoring: Human Pulse Diagnosis for Medical Assessments Using a Wearable Piezoelectret Sensing System (Adv. Funct. Mater. 40/2018)

Development of Pressure Sensor Based Wearable Pulse Detection Device for Radial Pulse Monitoring.

Multiple Design Strategies of Flexible Piezoresistive Pressure Sensors in Radial Artery Pulse Signals Monitoring

Conformable Amplified Lead Zirconate Titanate Sensors with Enhanced Piezoelectric Response for Cutaneous Pressure Monitoring

A Wearable Multisensory Pulse Sensor Based on Piezo-Thermic Transduction

A Wearable Sensor Using Structured Silver-Particle Reinforced PDMS for Radial Arterial Pulse Wave Monitoring.

Human Pulse Diagnosis For Medical Assessments Using A Wearable Piezoelectret Sensing System

A Piezoelectret-based Flexible Sensor for Pulse Monitoring.

3D fabric-based piezoresistive pressure sensor: design, preparation, performance and simulation

Wearable System Integrating Dual Piezoresistive and Photoplethysmography Sensors for Simultaneous Pulse Wave Monitoring

A Wearable Sensor Using Structured Silver‐Particle Reinforced PDMS for Radial Arterial Pulse Wave Monitoring

Design Rules for a Wearable Micro-Fabricated Piezo-Resistive Pressure Sensor

Spatiotemporal Measurement of Arterial Pulse Waves Enabled by Wearable Active-Matrix Pressure Sensor Arrays

A Sandwich-Structured Piezoresistive Sensor with Electrospun Nanofiber Mats As Supporting, Sensing, and Packaging Layers

Flexible Piezoresistive Sensors based on Conducting Polymer-coated Fabric Applied to Human Physiological Signals Monitoring

High Signal to Noise Ratio Piezoelectric Thin Film Sensor Based on Elastomer Amplification for Ambulatory Blood Pressure Monitoring.

Rapid-Response and Highly Sensitive Piezocapacitive Pressure Sensor Based on Micro Buckling Periodic Layers for Wearable Applications

Portable, Wireless Wearable Piezoelectric Arterial Pulse Monitoring System Based on Near-Field Communication Approach