Abstract:Development of flexible and freestanding electrode is fascinating for lithium-sulfur (Li-S) batteries to enable higher gravimetric energy density and wider potential applications. However, the lithium polysulfides shuttle effect remains challenging and leads to a severe capacity fading. Here, we study the sulfur cathode prepared via phase inversion method with polyethersulfone (PES) polymeric binder and the coupling strategy of the electrode with polysulfide-modified electrolyte to enhance the cells performance. The flexible/freestanding electrode was successfully prepared by the efficient and straight forward method, even it is possible for massive production of electrodes with various size. The resultant polymeric networks in the electrode can effectively trap the soluble polysulfides owing to the higher hydrophilicity and stronger affinity of PES than that with the routine polyvinylidene fluoride (PVDF) binder. Furthermore, we show a two-fold enhancement of the cell performance by coupling the electrode with polysulfide-modified electrolyte, giving an improved capacity of 1141 mAh g-1, lower polarization of 192 mV and more stable capacity retention with 100% Coulombic efficiency over 100 cycles at 0.25C. The advantages of favored strategy are further demonstrated in lithium-ion sulfur full battery with lithiated graphite anode, which demonstrates much improved performance than those previously reported. This work successfully introduces an efficient strategy for flexible/freestanding electrodes and enlightens the importance of coupling strategy to enhance the performances of Li-S batteries. Figure 1. (a) Digital photographs of the as-prepared composite via phase inversion method. (b) Cycle performance of half-cells using 2-layer PES-CNT-S and PVDF-CNT-S cathodes with polysulfide(PS)-free electrolyte and polysulfide(PS)-modified electrolyte at 0.25C. REFERENCES W. Wahyudi, Z. Cao, P. Kumar, M. Li, Y. Wu, M. N. Hedhili, T. D. Anthopoulos, L. Cavallo, L. J. Li, J. Ming, Adv. Funct. Mater., 2018, 28 (34), 1802244. Ming, Z. Cao, W. Wahyudi, M. Li, P. Kumar, Y. Wu, J. Y. Hwang, M. N. Hedhili, L. Cavallo, Y. K. Sun, L. J. Li, ACS Energy Lett., 2018, 3 (2), 335-340. Wang, Z. Cao, G. A. Elia, Y. Wu, W. Wahyudi, E. Abou-Hamad, A. H. Emwas, L. Cavallo, L. J. Li, J. Ming, ACS Energy Lett., 2018, 3 (12), 2899-2907. Figure 1

Multifunctional Radical Polymers-Enabled Rapid Charge/discharge and High Capacity for Flexible Self-Standing LiFePO4/PETM/SWNT Hybrid Electrodes

Multifunctional radical polymers-enabled rapid charge/discharge and high capacity for flexible self-standing LiFePO 4 /PETM/SWNT hybrid electrodes

Developing a Three-Dimensional Co-Continuous Phase Network Structure Via Enhanced Inter-Component Affinity for High-Performance Flexible Organic Radical Electrodes

Long-Life and High-Power Binder-Free Cathode Based on One-Step Synthesis of Radical Polymers with Multi-Pendant Groups

Radical polymer-grafted carbon nanotubes as high-performance cathode materials for lithium organic batteries with promoted n-/p-type redox reactions

Preparation of Tough, Binder‐Free, and Self‐Supporting LiFePO4 Cathode by Using Mono‐Dispersed Ultra‐Long Single‐Walled Carbon Nanotubes for High‐Rate Performance Li‐Ion Battery

In-situ Activated Polycation As a Multifunctional Additive for Li-S Batteries

Designing a Hybrid Electrode Toward High Energy Density with a Staged Li+ and PF6− Deintercalation/intercalation Mechanism

High Performance Flexible Lithium‐Ion Battery Electrodes: Ion Exchange Assisted Fabrication of Carbon Coated Nickel Oxide Nanosheet Arrays on Carbon Cloth

Flexible polytriphenylamine-based cathodes with reinforced energy-storage capacity for high-performance sodium-ion batteries

Redox‐Active Polymer Integrated with MXene for Ultra‐Stable and Fast Aqueous Proton Storage

Phase Inversion Strategy to Flexible Freestanding Electrodes: Critical Coupling of Binders and Electrolytes for High Performance Li-S Battery

Boosting Electrochemical Performance by Regulating Rigid-Flexible Microphase Separation of Multiblock Copolymers

Atomistic Structural Engineering of Conjugated Organic Polymer Cathodes for High-Performance Li-Organic Batteries

A TEMPO-grafted multi-functional cathode with strong anchoring ability towards redox mediators for high energy efficiency Li-O2 batteries

Facile Synthesis of flexible free-standing electrode for high energy density batteries by using PTMSP as binder

Dual In Situ Polymerization Strategy Endowing Rapid Ion Transfer Capability of Polymer Electrolyte toward Ni‐Rich‐Based Lithium Metal Batteries

In Situ Constructing Ultrathin, Robust‐Flexible Polymeric Electrolytes with Rapid Interfacial Ion Transport in Lithium Metal Batteries

Construction of an Ultrathin Multi-Functional Polymer Electrolyte for Safe and Stable All-Solid-state Batteries.

Constructing Electron/Ion Conductive‐Enhanced Ultrahigh Loading LiFePO4 Electrodes Using Polytetrafluoroethylene and Carbon Nanotubes for High‐Performance Batteries

In Situ Orthogonal Polymerization for Constructing Fast-Charging and Long-Lifespan Li Metal Batteries with Topological Copolymer Electrolytes